Opening ~Dec 2026📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

SAS FAB2 Slurry Blender

12100 Samsung Blvd, Austin, TX 78754, Austin, TX, 78754

SAS FAB2 Slurry Blender is a renovation/alteration project at 12100 Samsung Blvd, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Dec 2026. The project has an estimated value of $2.5M across about 1,100 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026025560

$2.5M

Project Value

1,100

Square Feet

$2.27K/sqft

Cost/SqFt

4 months

Duration

Registered:Jul 17, 2026

Start:Sep 1, 2026

Target:Dec 31, 2026

Remaining:166 days

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

SAS FAB2 Slurry Blender is a Renovation/Alteration project located at 12100 Samsung Blvd, Austin, TX 78754 in Austin, Texas. The project has an estimated value of $2.5M covering 1,100 sq ft. SAMSUNG AUSTIN SEMICONDUCTOR is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on July 17, 2026.

❓Frequently Asked Questions

What is SAS FAB2 Slurry Blender?

SAS FAB2 Slurry Blender is a renovation/alteration project at 12100 Samsung Blvd in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Installation of new Slurry Blender and distribution loops.

Is SAS FAB2 Slurry Blender open in Austin?

SAS FAB2 Slurry Blender is still under construction in Austin, TX, with an estimated completion of Dec 2026 according to its TDLR registration.

Where is SAS FAB2 Slurry Blender located?

SAS FAB2 Slurry Blender is located at 12100 Samsung Blvd, Austin, TX, 78754, in Travis County.

Who is the owner or developer of SAS FAB2 Slurry Blender?

SAMSUNG AUSTIN SEMICONDUCTOR is the property owner/developer of record for SAS FAB2 Slurry Blender, per its TDLR project registration.

Who is the architect or design firm for SAS FAB2 Slurry Blender?

Fuse Architecture Studio is the design firm of record for SAS FAB2 Slurry Blender, according to its TDLR filing.

How much does SAS FAB2 Slurry Blender cost and how big is it?

SAS FAB2 Slurry Blender has an estimated construction value of $2.5M and approximately 1,100 square feet (about $2.27K/sqft), based on its TDLR filing.

📋Scope of Work

Installation of new Slurry Blender and distribution loops.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.