Construction complete · Feb 2021🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

CDR Machine & Fabricating, Inc.

9540 FM 2932, Terrell, TX 75160, Terrell, TX, 75160

CDR Machine & Fabricating, Inc. is a new construction project at 9540 FM 2932, Terrell, in Kaufman County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2021). The project has an estimated value of $2.3M across about 21,600 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020008682

$2.3M

Project Value

21,600

Square Feet

$105/sqft

Cost/SqFt

1 year

Duration

Registered:Jan 8, 2020

Start:Feb 3, 2020

Target:Feb 2, 2021

🏁

Project Closed

Project has been completed and closed

CDR Machine & Fabricating, Inc. is a New Construction project located at 9540 FM 2932, Terrell, TX 75160 in Terrell, Texas. The project has an estimated value of $2.3M covering 21,600 sq ft. CDR Machine & Fabricating, Inc. is the property owner and AWA Architects is the design firm of record. The project was registered with TDLR on January 8, 2020.

❓Frequently Asked Questions

What is CDR Machine & Fabricating, Inc.?

CDR Machine & Fabricating, Inc. is a new construction project at 9540 FM 2932 in Terrell, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Grading, Paving, septic system, concrete foundation & paving, pre-engineered metal building, HVAC, lighting, 6,000 s.f. office finishout

Is CDR Machine & Fabricating, Inc. open in Terrell?

Construction on CDR Machine & Fabricating, Inc. is complete — TDLR records show the project passed its required accessibility inspection in Feb 2021. The building is finished and very likely open.

Where is CDR Machine & Fabricating, Inc. located?

CDR Machine & Fabricating, Inc. is located at 9540 FM 2932, Terrell, TX, 75160, in Kaufman County.

Who is the owner or developer of CDR Machine & Fabricating, Inc.?

CDR Machine & Fabricating, Inc. is the property owner/developer of record for CDR Machine & Fabricating, Inc., per its TDLR project registration.

Who is the architect or design firm for CDR Machine & Fabricating, Inc.?

AWA Architects is the design firm of record for CDR Machine & Fabricating, Inc., according to its TDLR filing.

How much does CDR Machine & Fabricating, Inc. cost and how big is it?

CDR Machine & Fabricating, Inc. has an estimated construction value of $2.3M and approximately 21,600 square feet (about $105/sqft), based on its TDLR filing.

📋Scope of Work

Grading, Paving, septic system, concrete foundation & paving, pre-engineered metal building, HVAC, lighting, 6,000 s.f. office finishout

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.