Home Depot Tool Rental Center
Home Depot Tool Rental Center is a renovation/alteration project at 1803 North I-35, Bellmead, in McLennan County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $800K across about 2,000 sq ft.
๐Project Metrics
TDLR #TABS2020013101Review Complete
Design review complete, construction may proceed
Home Depot Tool Rental Center is a Renovation/Alteration project located at 1803 North I-35, Bellmead, TX 76705 in Bellmead, Texas. The project has an estimated value of $800K covering 2,000 sq ft. Home Depot is the property owner and WD Partners is the design firm of record. The project was registered with TDLR on March 6, 2020.
โFrequently Asked Questions
What is Home Depot Tool Rental Center?
Home Depot Tool Rental Center is a renovation/alteration project at 1803 North I-35 in Bellmead, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: building in an area with in the existing building for the purpose of a tool rental center and adding a fenced in area outside the same side of the building for larger equipment storage and clean up.
Is Home Depot Tool Rental Center open in Bellmead?
Home Depot Tool Rental Center is currently under construction in Bellmead, TX. Its current TDLR status is "Review Complete".
Where is Home Depot Tool Rental Center located?
Home Depot Tool Rental Center is located at 1803 North I-35, Bellmead, TX, 76705, in McLennan County.
Who is the owner or developer of Home Depot Tool Rental Center?
Home Depot is the property owner/developer of record for Home Depot Tool Rental Center, per its TDLR project registration.
Who is the architect or design firm for Home Depot Tool Rental Center?
WD Partners is the design firm of record for Home Depot Tool Rental Center, according to its TDLR filing.
How much does Home Depot Tool Rental Center cost and how big is it?
Home Depot Tool Rental Center has an estimated construction value of $800K and approximately 2,000 square feet (about $400/sqft), based on its TDLR filing.
๐Scope of Work
building in an area with in the existing building for the purpose of a tool rental center and adding a fenced in area outside the same side of the building for larger equipment storage and clean up.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
๐ Compliance Timeline
๐ Project Timeline
Filed
Mar 6, 2020
Review Complete
Mar 6, 2020
Inspection Complete
Closed