Construction complete · Nov 2023🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Caliber Collision

Pecan Lane & Development Blvd., Bellmead, TX 76705, Bellmead, TX, 76705

Caliber Collision is a new construction project at Pecan Lane & Development Blvd., Bellmead, in McLennan County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Nov 2023). The project has an estimated value of $1.8M across about 16,345 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2023012808

$1.8M

Project Value

16,345

Square Feet

$107/sqft

Cost/SqFt

7 months

Duration

Registered:Feb 27, 2023

Start:May 1, 2023

Target:Nov 17, 2023

🏁

Project Closed

Project has been completed and closed

Caliber Collision is a New Construction project located at Pecan Lane & Development Blvd., Bellmead, TX 76705 in Bellmead, Texas. The project has an estimated value of $1.8M covering 16,345 sq ft. Cross Development is the property owner and NCA Partners-Architecture is the design firm of record. The project was registered with TDLR on February 27, 2023.

❓Frequently Asked Questions

What is Caliber Collision?

Caliber Collision is a new construction project at Pecan Lane & Development Blvd. in Bellmead, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Automobile repair facility with Administrative offices. Metal framed building w/ metal panels on shop exterior walls and stone veneer on admin. offices.

Is Caliber Collision open in Bellmead?

Construction on Caliber Collision is complete — TDLR records show the project passed its required accessibility inspection in Nov 2023. The building is finished and very likely open.

Where is Caliber Collision located?

Caliber Collision is located at Pecan Lane & Development Blvd., Bellmead, TX, 76705, in McLennan County.

Who is the owner or developer of Caliber Collision?

Cross Development is the property owner/developer of record for Caliber Collision, per its TDLR project registration.

Who is the architect or design firm for Caliber Collision?

NCA Partners-Architecture is the design firm of record for Caliber Collision, according to its TDLR filing.

How much does Caliber Collision cost and how big is it?

Caliber Collision has an estimated construction value of $1.8M and approximately 16,345 square feet (about $107/sqft), based on its TDLR filing.

📋Scope of Work

Automobile repair facility with Administrative offices. Metal framed building w/ metal panels on shop exterior walls and stone veneer on admin. offices.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.