Project has been completed and closed
FAB2 Mechanical Room Expansion is a Additions to Existing Building project located at 12100 Samsung Blvd., Austin, TX 78754 in Austin, Texas. The project has an estimated value of $36.4M covering 36,430 sq ft. Samsung Austin Semiconductor is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on July 10, 2020.
Addition of a new mechanical room and the expansion of an existing electrical room with a new battery room. This building addition is located on a secure campus with special security clearance for access.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Jul 10, 2020
Review Complete
Inspection Complete
Closed
Dec 17, 2021
Building permits found at or near this location
Home builders loop Ref: 2026-063452 EP ETJ
Express: Foundation repair
New construction in the ETJ SFR
Construct new driveway approach of 17 FT and sidewalk of 24.55 LF ***No final acceptance issued yet Approval attached for DS permits only. Bond 3lue 3onnett Concrete Services- Bond is going to expire in June 042026. This license expiration will expire you DS permits. But will go back to active status again once the license is reactivated. Current bond submit here https://app.smartsheet.com/b/form/cad1e53c88224399979f40df80ef6270.
New two-story SFR (4br/3ba) with attached garage covered patio and covered porch *PRODUCTION BUILDER*
