Construction complete · Oct 2021🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Fabrication Shop

4202 Santa Elena, Corpus Christi, TX 78405, Corpus Christi, TX, 78405

Fabrication Shop is a new construction project at 4202 Santa Elena, Corpus Christi, in Nueces County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2021). The project has an estimated value of $492K across about 20,820 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020021770

$492K

Project Value

20,820

Square Feet

$24/sqft

Cost/SqFt

1y 1mo

Duration

Registered:Aug 5, 2020

Start:Sep 1, 2020

Target:Oct 1, 2021

🏁

Project Closed

Project has been completed and closed

Fabrication Shop is a New Construction project located at 4202 Santa Elena, Corpus Christi, TX 78405 in Corpus Christi, Texas. The project has an estimated value of $492K covering 20,820 sq ft. Apex Heritage Group is the property owner and Arnold O. Moreno is the design firm of record. The project was registered with TDLR on August 5, 2020.

❓Frequently Asked Questions

What is Fabrication Shop?

Fabrication Shop is a new construction project at 4202 Santa Elena in Corpus Christi, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New metal fabrication shop with office.

Is Fabrication Shop open in Corpus Christi?

Construction on Fabrication Shop is complete — TDLR records show the project passed its required accessibility inspection in Oct 2021. The building is finished and very likely open.

Where is Fabrication Shop located?

Fabrication Shop is located at 4202 Santa Elena, Corpus Christi, TX, 78405, in Nueces County.

Who is the owner or developer of Fabrication Shop?

Apex Heritage Group is the property owner/developer of record for Fabrication Shop, per its TDLR project registration.

Who is the architect or design firm for Fabrication Shop?

Arnold O. Moreno is the design firm of record for Fabrication Shop, according to its TDLR filing.

How much does Fabrication Shop cost and how big is it?

Fabrication Shop has an estimated construction value of $492K and approximately 20,820 square feet (about $24/sqft), based on its TDLR filing.

📋Scope of Work

New metal fabrication shop with office.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.