Construction complete · Nov 2021🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Fabrication and Assembly Shop

4138 Russell, Corpus Christi, TX 78408, Corpus Christi, TX, 78408

Fabrication and Assembly Shop is a new construction project at 4138 Russell, Corpus Christi, in Nueces County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Nov 2021). The project has an estimated value of $325K across about 7,500 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020021772

$325K

Project Value

7,500

Square Feet

$43/sqft

Cost/SqFt

1y 2mo

Duration

Registered:Aug 5, 2020

Start:Sep 1, 2020

Target:Nov 1, 2021

🏁

Project Closed

Project has been completed and closed

Fabrication and Assembly Shop is a New Construction project located at 4138 Russell, Corpus Christi, TX 78408 in Corpus Christi, Texas. The project has an estimated value of $325K covering 7,500 sq ft. Jon Hurt is the property owner and Arnold O. Moreno is the design firm of record. The project was registered with TDLR on August 5, 2020.

❓Frequently Asked Questions

What is Fabrication and Assembly Shop?

Fabrication and Assembly Shop is a new construction project at 4138 Russell in Corpus Christi, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New metal fabrication and assembly shop

Is Fabrication and Assembly Shop open in Corpus Christi?

Construction on Fabrication and Assembly Shop is complete — TDLR records show the project passed its required accessibility inspection in Nov 2021. The building is finished and very likely open.

Where is Fabrication and Assembly Shop located?

Fabrication and Assembly Shop is located at 4138 Russell, Corpus Christi, TX, 78408, in Nueces County.

Who is the owner or developer of Fabrication and Assembly Shop?

Jon Hurt is the property owner/developer of record for Fabrication and Assembly Shop, per its TDLR project registration.

Who is the architect or design firm for Fabrication and Assembly Shop?

Arnold O. Moreno is the design firm of record for Fabrication and Assembly Shop, according to its TDLR filing.

How much does Fabrication and Assembly Shop cost and how big is it?

Fabrication and Assembly Shop has an estimated construction value of $325K and approximately 7,500 square feet (about $43/sqft), based on its TDLR filing.

📋Scope of Work

New metal fabrication and assembly shop

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.