Construction complete · Jul 2021🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

FIRST TECH FEDERAL CREDIT UNION

1701 CITY PLAZA DRIVE, Spring, TX 77389, Spring, TX, 77389

FIRST TECH FEDERAL CREDIT UNION is a new construction project at 1701 CITY PLAZA DRIVE, Spring, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jul 2021). The project has an estimated value of $341K across about 2,275 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2021003122

$341K

Project Value

2,275

Square Feet

$150/sqft

Cost/SqFt

7 months

Duration

Registered:Oct 23, 2020

Start:Jan 4, 2021

Target:Jul 31, 2021

🏁

Project Closed

Project has been completed and closed

FIRST TECH FEDERAL CREDIT UNION is a New Construction project located at 1701 CITY PLAZA DRIVE, Spring, TX 77389 in Spring, Texas. The project has an estimated value of $341K covering 2,275 sq ft. Springwoods 4A, LLC is the property owner and INVENTURE is the design firm of record. The project was registered with TDLR on October 23, 2020.

❓Frequently Asked Questions

What is FIRST TECH FEDERAL CREDIT UNION?

FIRST TECH FEDERAL CREDIT UNION is a new construction project at 1701 CITY PLAZA DRIVE in Spring, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: LEASE SPACE BUILD-OUT

Is FIRST TECH FEDERAL CREDIT UNION open in Spring?

Construction on FIRST TECH FEDERAL CREDIT UNION is complete — TDLR records show the project passed its required accessibility inspection in Jul 2021. The building is finished and very likely open.

Where is FIRST TECH FEDERAL CREDIT UNION located?

FIRST TECH FEDERAL CREDIT UNION is located at 1701 CITY PLAZA DRIVE, Spring, TX, 77389, in Harris County.

Who is the owner or developer of FIRST TECH FEDERAL CREDIT UNION?

Springwoods 4A, LLC is the property owner/developer of record for FIRST TECH FEDERAL CREDIT UNION, per its TDLR project registration.

Who is the architect or design firm for FIRST TECH FEDERAL CREDIT UNION?

INVENTURE is the design firm of record for FIRST TECH FEDERAL CREDIT UNION, according to its TDLR filing.

How much does FIRST TECH FEDERAL CREDIT UNION cost and how big is it?

FIRST TECH FEDERAL CREDIT UNION has an estimated construction value of $341K and approximately 2,275 square feet (about $150/sqft), based on its TDLR filing.

📋Scope of Work

LEASE SPACE BUILD-OUT

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.