Construction complete · Sep 2021✅Inspection Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

DDF6

Risinger Rd., Fort Worth, TX 76140, Fort Worth, TX, 76140

DDF6 is a new construction project at Risinger Rd., Fort Worth, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Sep 2021). The project has an estimated value of $40.2M across about 219,000 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2021003854

$40.2M

Project Value

219,000

Square Feet

$184/sqft

Cost/SqFt

8 months

Duration

Registered:Nov 5, 2020

Start:Jan 4, 2021

Target:Sep 8, 2021

✅

Inspection Complete

Final inspection completed, awaiting project closure

DDF6 is a New Construction project located at Risinger Rd., Fort Worth, TX 76140 in Fort Worth, Texas. The project has an estimated value of $40.2M covering 219,000 sq ft. Hillwood Properties is the property owner and PDMS Design Group is the design firm of record. The project was registered with TDLR on November 5, 2020.

❓Frequently Asked Questions

What is DDF6?

DDF6 is a new construction project at Risinger Rd. in Fort Worth, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Project consists of the construction of a Build-to-Suit facility. It is a single story industrial building with concrete tilt-up exterior load bearing wall panels, steel column and truss framing, with purlins/decking roof construction.

Is DDF6 open in Fort Worth?

Construction on DDF6 is complete — TDLR records show the project passed its required accessibility inspection in Sep 2021. The building is finished and very likely open.

Where is DDF6 located?

DDF6 is located at Risinger Rd., Fort Worth, TX, 76140, in Tarrant County.

Who is the owner or developer of DDF6?

Hillwood Properties is the property owner/developer of record for DDF6, per its TDLR project registration.

Who is the architect or design firm for DDF6?

PDMS Design Group is the design firm of record for DDF6, according to its TDLR filing.

How much does DDF6 cost and how big is it?

DDF6 has an estimated construction value of $40.2M and approximately 219,000 square feet (about $184/sqft), based on its TDLR filing.

📋Scope of Work

Project consists of the construction of a Build-to-Suit facility. It is a single story industrial building with concrete tilt-up exterior load bearing wall panels, steel column and truss framing, with purlins/decking roof construction.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.