Construction complete · Oct 2021🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

J&S Leasing Workshop

12724 South US Highway 183, Mustang Ridge, TX 78610, Mustang Ridge, TX, 78610

J&S Leasing Workshop is a new construction project at 12724 South US Highway 183, Mustang Ridge, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2021). The project has an estimated value of $125K across about 7,500 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2021016713

$125K

Project Value

7,500

Square Feet

$17/sqft

Cost/SqFt

3 months

Duration

Registered:May 30, 2021

Start:Jul 19, 2021

Target:Oct 25, 2021

🏁

Project Closed

Project has been completed and closed

J&S Leasing Workshop is a New Construction project located at 12724 South US Highway 183, Mustang Ridge, TX 78610 in Mustang Ridge, Texas. The project has an estimated value of $125K covering 7,500 sq ft. Sonny Horton is the property owner and Urban Foundry Architecture is the design firm of record. The project was registered with TDLR on May 30, 2021.

❓Frequently Asked Questions

What is J&S Leasing Workshop?

J&S Leasing Workshop is a new construction project at 12724 South US Highway 183 in Mustang Ridge, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Construction of new +/- 7500 sf Pre Engineered Metal Building

Is J&S Leasing Workshop open in Mustang Ridge?

Construction on J&S Leasing Workshop is complete — TDLR records show the project passed its required accessibility inspection in Oct 2021. The building is finished and very likely open.

Where is J&S Leasing Workshop located?

J&S Leasing Workshop is located at 12724 South US Highway 183, Mustang Ridge, TX, 78610, in Travis County.

Who is the owner or developer of J&S Leasing Workshop?

Sonny Horton is the property owner/developer of record for J&S Leasing Workshop, per its TDLR project registration.

Who is the architect or design firm for J&S Leasing Workshop?

Urban Foundry Architecture is the design firm of record for J&S Leasing Workshop, according to its TDLR filing.

How much does J&S Leasing Workshop cost and how big is it?

J&S Leasing Workshop has an estimated construction value of $125K and approximately 7,500 square feet (about $17/sqft), based on its TDLR filing.

📋Scope of Work

Construction of new +/- 7500 sf Pre Engineered Metal Building

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.