Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Advanced Fabricators

118 Gotcher St, Lake Dallas, TX 75065, Lake Dallas, TX, 75065

Advanced Fabricators is a new construction project at 118 Gotcher St, Lake Dallas, in Denton County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $100K across about 4,000 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2021018549

$100K

Project Value

4,000

Square Feet

$25/sqft

Cost/SqFt

5 months

Duration

Registered:Jun 24, 2021

Start:Aug 13, 2021

Target:Dec 31, 2021

📝

Review Complete

Design review complete, construction may proceed

Advanced Fabricators is a New Construction project located at 118 Gotcher St, Lake Dallas, TX 75065 in Lake Dallas, Texas. The project has an estimated value of $100K covering 4,000 sq ft. Elk Horn Realty LLC is the property owner and Broadstone Design Group is the design firm of record. The project was registered with TDLR on June 24, 2021.

❓Frequently Asked Questions

What is Advanced Fabricators?

Advanced Fabricators is a new construction project at 118 Gotcher St in Lake Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: PRE-ENGINEERED METAL BUILDING (PEMB) to house offices, retail space and storage for tenant use. Tenant funded.

Is Advanced Fabricators open in Lake Dallas?

Advanced Fabricators is currently under construction in Lake Dallas, TX. Its current TDLR status is "Review Complete".

Where is Advanced Fabricators located?

Advanced Fabricators is located at 118 Gotcher St, Lake Dallas, TX, 75065, in Denton County.

Who is the owner or developer of Advanced Fabricators?

Elk Horn Realty LLC is the property owner/developer of record for Advanced Fabricators, per its TDLR project registration.

Who is the architect or design firm for Advanced Fabricators?

Broadstone Design Group is the design firm of record for Advanced Fabricators, according to its TDLR filing.

How much does Advanced Fabricators cost and how big is it?

Advanced Fabricators has an estimated construction value of $100K and approximately 4,000 square feet (about $25/sqft), based on its TDLR filing.

📋Scope of Work

PRE-ENGINEERED METAL BUILDING (PEMB) to house offices, retail space and storage for tenant use. Tenant funded.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.