Under construction📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

Miller 635 Distribution Center

10851 Miller Road, Dallas, TX 75238, Dallas, TX, 75238

Miller 635 Distribution Center is a new construction project at 10851 Miller Road, Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $12.7M across about 179,280 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2023002629

$12.7M

Project Value

179,280

Square Feet

$71/sqft

Cost/SqFt

10 months

Duration

Registered:Oct 6, 2022

Start:Jun 1, 2025

Target:Apr 1, 2026

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Miller 635 Distribution Center is a New Construction project located at 10851 Miller Road, Dallas, TX 75238 in Dallas, Texas. The project has an estimated value of $12.7M covering 179,280 sq ft. IDI Logistics is the property owner and Ware Malcomb is the design firm of record. The project was registered with TDLR on October 6, 2022.

❓Frequently Asked Questions

What is Miller 635 Distribution Center?

Miller 635 Distribution Center is a new construction project at 10851 Miller Road in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Concrete tilt-wall manufacturing plant with office finishout for corrugated paper facility

Is Miller 635 Distribution Center open in Dallas?

Miller 635 Distribution Center is currently under construction in Dallas, TX. Its current TDLR status is "Project Registered".

Where is Miller 635 Distribution Center located?

Miller 635 Distribution Center is located at 10851 Miller Road, Dallas, TX, 75238, in Dallas County.

Who is the owner or developer of Miller 635 Distribution Center?

IDI Logistics is the property owner/developer of record for Miller 635 Distribution Center, per its TDLR project registration.

Who is the architect or design firm for Miller 635 Distribution Center?

Ware Malcomb is the design firm of record for Miller 635 Distribution Center, according to its TDLR filing.

How much does Miller 635 Distribution Center cost and how big is it?

Miller 635 Distribution Center has an estimated construction value of $12.7M and approximately 179,280 square feet (about $71/sqft), based on its TDLR filing.

📋Scope of Work

Concrete tilt-wall manufacturing plant with office finishout for corrugated paper facility

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.