Project has been completed and closed
AMAT GIS Hub/CTE is a Renovation/Alteration project located at 9700 US 290, Austin, TX 78724 in Austin, Texas. The project has an estimated value of $320K covering 3,324 sq ft. Applied Materials is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on May 22, 2023.
AMAT GIS Hub/CTE is a renovation/alteration project at 9700 US 290, Austin, TX 78724 in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Renovation of existing lab and office space.
Construction on AMAT GIS Hub/CTE is complete — TDLR records show the project passed its required accessibility inspection in Nov 2023. The building is finished and very likely open.
AMAT GIS Hub/CTE is located at 9700 US 290, Austin, TX 78724, Austin, TX, 78724, in Travis County.
Applied Materials is the property owner/developer of record for AMAT GIS Hub/CTE, per its TDLR project registration.
Fuse Architecture Studio is the design firm of record for AMAT GIS Hub/CTE, according to its TDLR filing.
AMAT GIS Hub/CTE has an estimated construction value of $320K and approximately 3,324 square feet (about $96/sqft), based on its TDLR filing.
Renovation of existing lab and office space.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
May 22, 2023
Review Complete
Inspection Complete
Closed
Nov 15, 2023
Building permits found at or near this location
Rip and replace fiber optic cable on cell tower ground cabinets trenching for new conduit.
INSTALL NEW 200 AMP PANELBOARD FOR B34 CSMG MF TEST BAY.
Replacement of complete existing central heat and air system with or without duct work LIKE FOR LIKE: 3T horizontal gas two stage system (downstairs)
install water softener at residence
install sprinkler system
