Construction complete · Feb 2026🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Clovis Crossing Bulding 1 Demising Wall

1603 Clovis Barker Road Building 1, San Marcos, TX 78666, San Marcos, TX, 78666

Clovis Crossing Bulding 1 Demising Wall is a renovation/alteration project at 1603 Clovis Barker Road Building 1, San Marcos, in Hays County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2026). The project has an estimated value of $135K across about 51,734 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2025016671

$135K

Project Value

51,734

Square Feet

$3/sqft

Cost/SqFt

2 months

Duration

Registered:Apr 15, 2025

Start:Apr 30, 2025

Target:Jun 15, 2025

🏁

Project Closed

Project has been completed and closed

Clovis Crossing Bulding 1 Demising Wall is a Renovation/Alteration project located at 1603 Clovis Barker Road Building 1, San Marcos, TX 78666 in San Marcos, Texas. The project has an estimated value of $135K covering 51,734 sq ft. Denholtz is the property owner and METHOD ARCHITECTURE is the design firm of record. The project was registered with TDLR on April 15, 2025.

❓Frequently Asked Questions

What is Clovis Crossing Bulding 1 Demising Wall?

Clovis Crossing Bulding 1 Demising Wall is a renovation/alteration project at 1603 Clovis Barker Road Building 1 in San Marcos, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Installation of new demising wall in first generation warehouse

Is Clovis Crossing Bulding 1 Demising Wall open in San Marcos?

Construction on Clovis Crossing Bulding 1 Demising Wall is complete — TDLR records show the project passed its required accessibility inspection in Feb 2026. The building is finished and very likely open.

Where is Clovis Crossing Bulding 1 Demising Wall located?

Clovis Crossing Bulding 1 Demising Wall is located at 1603 Clovis Barker Road Building 1, San Marcos, TX, 78666, in Hays County.

Who is the owner or developer of Clovis Crossing Bulding 1 Demising Wall?

Denholtz is the property owner/developer of record for Clovis Crossing Bulding 1 Demising Wall, per its TDLR project registration.

Who is the architect or design firm for Clovis Crossing Bulding 1 Demising Wall?

METHOD ARCHITECTURE is the design firm of record for Clovis Crossing Bulding 1 Demising Wall, according to its TDLR filing.

How much does Clovis Crossing Bulding 1 Demising Wall cost and how big is it?

Clovis Crossing Bulding 1 Demising Wall has an estimated construction value of $135K and approximately 51,734 square feet (about $3/sqft), based on its TDLR filing.

📋Scope of Work

Installation of new demising wall in first generation warehouse

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.