Under construction📝Review Complete🏗️ New Construction💵 This project involves public funds, public land, or is a Federally funded roadway project.

Sienna Parkway Roundabout

830 1/2 Sienna Parkway, Missouri City, TX 77459, Missouri City, TX, 77459

Sienna Parkway Roundabout is a new construction project at 830 1/2 Sienna Parkway, Missouri City, in Fort Bend County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $888K across about 70,205 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025022152

$888K

Project Value

70,205

Square Feet

$13/sqft

Cost/SqFt

7 months

Duration

Registered:Jun 26, 2025

Start:Sep 15, 2025

Target:Apr 15, 2026

📝

Review Complete

Design review complete, construction may proceed

Sienna Parkway Roundabout is a New Construction project located at 830 1/2 Sienna Parkway, Missouri City, TX 77459 in Missouri City, Texas. The project has an estimated value of $888K covering 70,205 sq ft. Sienna MUD 5 c/o ABHR, LLP is the property owner and TBG is the design firm of record. The project was registered with TDLR on June 26, 2025.

❓Frequently Asked Questions

What is Sienna Parkway Roundabout?

Sienna Parkway Roundabout is a new construction project at 830 1/2 Sienna Parkway in Missouri City, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Installation of concrete sidewalks, entry wall, fountain, and roundabout

Is Sienna Parkway Roundabout open in Missouri City?

Sienna Parkway Roundabout is currently under construction in Missouri City, TX. Its current TDLR status is "Review Complete".

Where is Sienna Parkway Roundabout located?

Sienna Parkway Roundabout is located at 830 1/2 Sienna Parkway, Missouri City, TX, 77459, in Fort Bend County.

Who is the owner or developer of Sienna Parkway Roundabout?

Sienna MUD 5 c/o ABHR, LLP is the property owner/developer of record for Sienna Parkway Roundabout, per its TDLR project registration.

Who is the architect or design firm for Sienna Parkway Roundabout?

TBG is the design firm of record for Sienna Parkway Roundabout, according to its TDLR filing.

How much does Sienna Parkway Roundabout cost and how big is it?

Sienna Parkway Roundabout has an estimated construction value of $888K and approximately 70,205 square feet (about $13/sqft), based on its TDLR filing.

📋Scope of Work

Installation of concrete sidewalks, entry wall, fountain, and roundabout

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.