Construction complete · Feb 2026🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

FSSB ATM Drives

101 South Avenue G, Clifton, TX 76634, Clifton, TX, 76634

FSSB ATM Drives is a new construction project at 101 South Avenue G, Clifton, in Bosque County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2026). The project has an estimated value of $100K across about 2,000 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2026004131

$100K

Project Value

2,000

Square Feet

$50/sqft

Cost/SqFt

1 months

Duration

Registered:Oct 23, 2025

Start:Oct 31, 2025

Target:Nov 28, 2025

🏁

Project Closed

Project has been completed and closed

FSSB ATM Drives is a New Construction project located at 101 South Avenue G, Clifton, TX 76634 in Clifton, Texas. The project has an estimated value of $100K covering 2,000 sq ft. First Security State Bank of Cranfills Gap is the property owner and Rogers-Ford, L.C. is the design firm of record. The project was registered with TDLR on October 23, 2025.

❓Frequently Asked Questions

What is FSSB ATM Drives?

FSSB ATM Drives is a new construction project at 101 South Avenue G in Clifton, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New curbcuts and paving for a drive up ATM, ATM foundation, Light pole bases and lights.

Is FSSB ATM Drives open in Clifton?

Construction on FSSB ATM Drives is complete — TDLR records show the project passed its required accessibility inspection in Feb 2026. The building is finished and very likely open.

Where is FSSB ATM Drives located?

FSSB ATM Drives is located at 101 South Avenue G, Clifton, TX, 76634, in Bosque County.

Who is the owner or developer of FSSB ATM Drives?

First Security State Bank of Cranfills Gap is the property owner/developer of record for FSSB ATM Drives, per its TDLR project registration.

Who is the architect or design firm for FSSB ATM Drives?

Rogers-Ford, L.C. is the design firm of record for FSSB ATM Drives, according to its TDLR filing.

How much does FSSB ATM Drives cost and how big is it?

FSSB ATM Drives has an estimated construction value of $100K and approximately 2,000 square feet (about $50/sqft), based on its TDLR filing.

📋Scope of Work

New curbcuts and paving for a drive up ATM, ATM foundation, Light pole bases and lights.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.