Opening ~Dec 2026📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Zone 1 &10 furnaces

6800 S HWY 75 SHERMAN, Sherman, TX 75090, Sherman, TX, 75090

Zone 1 &10 furnaces is a renovation/alteration project at 6800 S HWY 75 SHERMAN, Sherman, in Sherman County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Dec 2026. The project has an estimated value of $10.0M across about 61,923 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026021000

$10.0M

Project Value

61,923

Square Feet

$161/sqft

Cost/SqFt

6 months

Duration

Registered:May 22, 2026

Start:Jun 1, 2026

Target:Dec 1, 2026

Remaining:139 days

📝

Review Complete

Design review complete, construction may proceed

Zone 1 &10 furnaces is a Renovation/Alteration project located at 6800 S HWY 75 SHERMAN, Sherman, TX 75090 in Sherman, Texas. The project has an estimated value of $10.0M covering 61,923 sq ft. FINISAR SHERMAN RE HOLDCO LLC is the property owner and MJMc Architects is the design firm of record. The project was registered with TDLR on May 22, 2026.

❓Frequently Asked Questions

What is Zone 1 &10 furnaces?

Zone 1 &10 furnaces is a renovation/alteration project at 6800 S HWY 75 SHERMAN in Sherman, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: retrofit of building for furnaces

Is Zone 1 &10 furnaces open in Sherman?

Zone 1 &10 furnaces is still under construction in Sherman, TX, with an estimated completion of Dec 2026 according to its TDLR registration.

Where is Zone 1 &10 furnaces located?

Zone 1 &10 furnaces is located at 6800 S HWY 75 SHERMAN, Sherman, TX, 75090, in Sherman County.

Who is the owner or developer of Zone 1 &10 furnaces?

FINISAR SHERMAN RE HOLDCO LLC is the property owner/developer of record for Zone 1 &10 furnaces, per its TDLR project registration.

Who is the architect or design firm for Zone 1 &10 furnaces?

MJMc Architects is the design firm of record for Zone 1 &10 furnaces, according to its TDLR filing.

How much does Zone 1 &10 furnaces cost and how big is it?

Zone 1 &10 furnaces has an estimated construction value of $10.0M and approximately 61,923 square feet (about $161/sqft), based on its TDLR filing.

📋Scope of Work

retrofit of building for furnaces

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.