Construction complete · Mar 2019🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Martin UAV

650 Industry Way, Suite 300 650 Industry Way, Prosper, TX 75078, Prosper, TX, 75078

Martin UAV is a renovation/alteration project at 650 Industry Way, Suite 300 650 Industry Way, Prosper, in Collin County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Mar 2019). The project has an estimated value of $700K across about 15,075 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2019000906

$700K

Project Value

15,075

Square Feet

$46/sqft

Cost/SqFt

3 months

Duration

Registered:Dec 14, 2018

Start:Jan 1, 2019

Target:Mar 31, 2019

🏁

Project Closed

Project has been completed and closed

Martin UAV is a Renovation/Alteration project located at 650 Industry Way, Suite 300 650 Industry Way, Prosper, TX 75078 in Prosper, Texas. The project has an estimated value of $700K covering 15,075 sq ft. Crossland Texas Industrial, LLC is the property owner and Entos Design is the design firm of record. The project was registered with TDLR on December 14, 2018.

❓Frequently Asked Questions

What is Martin UAV?

Martin UAV is a renovation/alteration project at 650 Industry Way, Suite 300 650 Industry Way in Prosper, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior Tenant Finish-Out (first generation space). New Rest Rooms, Break Room, Office / Warehouse / Workshop. Exterior Accessible Route not in scope of work.

Is Martin UAV open in Prosper?

Construction on Martin UAV is complete — TDLR records show the project passed its required accessibility inspection in Mar 2019. The building is finished and very likely open.

Where is Martin UAV located?

Martin UAV is located at 650 Industry Way, Suite 300 650 Industry Way, Prosper, TX, 75078, in Collin County.

Who is the owner or developer of Martin UAV?

Crossland Texas Industrial, LLC is the property owner/developer of record for Martin UAV, per its TDLR project registration.

Who is the architect or design firm for Martin UAV?

Entos Design is the design firm of record for Martin UAV, according to its TDLR filing.

How much does Martin UAV cost and how big is it?

Martin UAV has an estimated construction value of $700K and approximately 15,075 square feet (about $46/sqft), based on its TDLR filing.

📋Scope of Work

Interior Tenant Finish-Out (first generation space). New Rest Rooms, Break Room, Office / Warehouse / Workshop. Exterior Accessible Route not in scope of work.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.