Under construction📝Review Complete🔧 Additions to Existing Building💵 This project is privately funded, on private land for private use.

Clean Room Addition Midland Manufacturing

4800 Esco, Fort Worth, TX 76140, Fort Worth, TX, 76140

Clean Room Addition Midland Manufacturing is a additions to existing building project at 4800 Esco, Fort Worth, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $350K across about 2,606 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2020015081

$350K

Project Value

2,606

Square Feet

$134/sqft

Cost/SqFt

3 months

Duration

Registered:Apr 6, 2020

Start:May 1, 2020

Target:Jul 31, 2020

📝

Review Complete

Design review complete, construction may proceed

Clean Room Addition Midland Manufacturing is a Additions to Existing Building project located at 4800 Esco, Fort Worth, TX 76140 in Fort Worth, Texas. The project has an estimated value of $350K covering 2,606 sq ft. Midland Manufacturing is the property owner and ERN Architects, Inc. is the design firm of record. The project was registered with TDLR on April 6, 2020.

❓Frequently Asked Questions

What is Clean Room Addition Midland Manufacturing?

Clean Room Addition Midland Manufacturing is a additions to existing building project at 4800 Esco in Fort Worth, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Addition to manufacturing plant

Is Clean Room Addition Midland Manufacturing open in Fort Worth?

Clean Room Addition Midland Manufacturing is currently under construction in Fort Worth, TX. Its current TDLR status is "Review Complete".

Where is Clean Room Addition Midland Manufacturing located?

Clean Room Addition Midland Manufacturing is located at 4800 Esco, Fort Worth, TX, 76140, in Tarrant County.

Who is the owner or developer of Clean Room Addition Midland Manufacturing?

Midland Manufacturing is the property owner/developer of record for Clean Room Addition Midland Manufacturing, per its TDLR project registration.

Who is the architect or design firm for Clean Room Addition Midland Manufacturing?

ERN Architects, Inc. is the design firm of record for Clean Room Addition Midland Manufacturing, according to its TDLR filing.

How much does Clean Room Addition Midland Manufacturing cost and how big is it?

Clean Room Addition Midland Manufacturing has an estimated construction value of $350K and approximately 2,606 square feet (about $134/sqft), based on its TDLR filing.

📋Scope of Work

Addition to manufacturing plant

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.