Construction complete · Sep 2021🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

G & G Aviations

10200 Dorbant Dr, Conroe, TX 77303, Conroe, TX, 77303

G & G Aviations is a new construction project at 10200 Dorbant Dr, Conroe, in Montgomery County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Sep 2021). The project has an estimated value of $124K across about 3,900 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020016789

$124K

Project Value

3,900

Square Feet

$32/sqft

Cost/SqFt

1y 4mo

Duration

Registered:May 5, 2020

Start:Jun 1, 2020

Target:Sep 30, 2021

🏁

Project Closed

Project has been completed and closed

G & G Aviations is a New Construction project located at 10200 Dorbant Dr, Conroe, TX 77303 in Conroe, Texas. The project has an estimated value of $124K covering 3,900 sq ft. G & G Aviation is the property owner and Iron Bros is the design firm of record. The project was registered with TDLR on May 5, 2020.

❓Frequently Asked Questions

What is G & G Aviations?

G & G Aviations is a new construction project at 10200 Dorbant Dr in Conroe, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Concrete metal building, storage for airplanes

Is G & G Aviations open in Conroe?

Construction on G & G Aviations is complete — TDLR records show the project passed its required accessibility inspection in Sep 2021. The building is finished and very likely open.

Where is G & G Aviations located?

G & G Aviations is located at 10200 Dorbant Dr, Conroe, TX, 77303, in Montgomery County.

Who is the owner or developer of G & G Aviations?

G & G Aviation is the property owner/developer of record for G & G Aviations, per its TDLR project registration.

Who is the architect or design firm for G & G Aviations?

Iron Bros is the design firm of record for G & G Aviations, according to its TDLR filing.

How much does G & G Aviations cost and how big is it?

G & G Aviations has an estimated construction value of $124K and approximately 3,900 square feet (about $32/sqft), based on its TDLR filing.

📋Scope of Work

Concrete metal building, storage for airplanes

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.