B34 Dimensions - Phase 2A Fit-Up
B34 Dimensions - Phase 2A Fit-Up is a renovation/alteration project at 9700 US-290, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2020). The project has an estimated value of $1.6M across about 5,000 sq ft.
📊Project Metrics
TDLR #TABS2020018791Project Closed
Project has been completed and closed
B34 Dimensions - Phase 2A Fit-Up is a Renovation/Alteration project located at 9700 US-290, Austin, TX 78745 in Austin, Texas. The project has an estimated value of $1.6M covering 5,000 sq ft. Applied Materials is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on June 10, 2020.
❓Frequently Asked Questions
What is B34 Dimensions - Phase 2A Fit-Up?
B34 Dimensions - Phase 2A Fit-Up is a renovation/alteration project at 9700 US-290 in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Convert warehouse space to ISO 6 Cleanroom.
Is B34 Dimensions - Phase 2A Fit-Up open in Austin?
Construction on B34 Dimensions - Phase 2A Fit-Up is complete — TDLR records show the project passed its required accessibility inspection in Oct 2020. The building is finished and very likely open.
Where is B34 Dimensions - Phase 2A Fit-Up located?
B34 Dimensions - Phase 2A Fit-Up is located at 9700 US-290, Austin, TX, 78745, in Travis County.
Who is the owner or developer of B34 Dimensions - Phase 2A Fit-Up?
Applied Materials is the property owner/developer of record for B34 Dimensions - Phase 2A Fit-Up, per its TDLR project registration.
Who is the architect or design firm for B34 Dimensions - Phase 2A Fit-Up?
Fuse Architecture Studio is the design firm of record for B34 Dimensions - Phase 2A Fit-Up, according to its TDLR filing.
How much does B34 Dimensions - Phase 2A Fit-Up cost and how big is it?
B34 Dimensions - Phase 2A Fit-Up has an estimated construction value of $1.6M and approximately 5,000 square feet (about $320/sqft), based on its TDLR filing.
📋Scope of Work
Convert warehouse space to ISO 6 Cleanroom.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Jun 10, 2020
Review Complete
Inspection Complete
Closed
Oct 30, 2020
🔗Related Projects
👤Same Owner
$3.0M total📄Related City Permits
Building permits found at or near this location
Interior remodel 2nd floor areas at existing manufacturing facility- Etch Paros
Interior remodel 2nd floor areas at existing manufacturing facility- Etch Paros
Interior remodel 2nd floor areas at existing manufacturing facility- Etch Paros
Rip and replace fiber optic cable on cell tower ground cabinets trenching for new conduit.
INSTALL NEW 200 AMP PANELBOARD FOR B34 CSMG MF TEST BAY.