Construction complete · Jul 2022✅Inspection Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Murphy USA

3804 West Erwin Street, State Highway 64, Tyler, TX 75704, Tyler, TX, 75704

Murphy USA is a new construction project at 3804 West Erwin Street, State Highway 64, Tyler, in Smith County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jul 2022). The project has an estimated value of $500K across about 1,400 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2022003014

$500K

Project Value

1,400

Square Feet

$357/sqft

Cost/SqFt

5 months

Duration

Registered:Oct 13, 2021

Start:Feb 22, 2022

Target:Jul 22, 2022

✅

Inspection Complete

Final inspection completed, awaiting project closure

Murphy USA is a New Construction project located at 3804 West Erwin Street, State Highway 64, Tyler, TX 75704 in Tyler, Texas. The project has an estimated value of $500K covering 1,400 sq ft. Murphy USA is the property owner and JM Civil Engineering, LLC is the design firm of record. The project was registered with TDLR on October 13, 2021.

❓Frequently Asked Questions

What is Murphy USA?

Murphy USA is a new construction project at 3804 West Erwin Street, State Highway 64 in Tyler, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Demolition of Existing site to build new USTs, building, canopy, and parking lot.

Is Murphy USA open in Tyler?

Construction on Murphy USA is complete — TDLR records show the project passed its required accessibility inspection in Jul 2022. The building is finished and very likely open.

Where is Murphy USA located?

Murphy USA is located at 3804 West Erwin Street, State Highway 64, Tyler, TX, 75704, in Smith County.

Who is the owner or developer of Murphy USA?

Murphy USA is the property owner/developer of record for Murphy USA, per its TDLR project registration.

Who is the architect or design firm for Murphy USA?

JM Civil Engineering, LLC is the design firm of record for Murphy USA, according to its TDLR filing.

How much does Murphy USA cost and how big is it?

Murphy USA has an estimated construction value of $500K and approximately 1,400 square feet (about $357/sqft), based on its TDLR filing.

📋Scope of Work

Demolition of Existing site to build new USTs, building, canopy, and parking lot.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.