AMAT B41 CSG Lab Expansion - Phase 2
AMAT B41 CSG Lab Expansion - Phase 2 is a renovation/alteration project at 9700 US 290, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2023). The project has an estimated value of $1.0M across about 10,000 sq ft.
📊Project Metrics
TDLR #TABS2022027053Project Closed
Project has been completed and closed
AMAT B41 CSG Lab Expansion - Phase 2 is a Renovation/Alteration project located at 9700 US 290, Austin, TX 78754 in Austin, Texas. The project has an estimated value of $1.0M covering 10,000 sq ft. Applied Materials is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on August 25, 2022.
❓Frequently Asked Questions
What is AMAT B41 CSG Lab Expansion - Phase 2?
AMAT B41 CSG Lab Expansion - Phase 2 is a renovation/alteration project at 9700 US 290 in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Conversion of warehouse space into an expansion of the CSG Lab. The lab expansion will include the removal of the temporary partition installed as part of Phase 1 to create one large lab area.
Is AMAT B41 CSG Lab Expansion - Phase 2 open in Austin?
Construction on AMAT B41 CSG Lab Expansion - Phase 2 is complete — TDLR records show the project passed its required accessibility inspection in Oct 2023. The building is finished and very likely open.
Where is AMAT B41 CSG Lab Expansion - Phase 2 located?
AMAT B41 CSG Lab Expansion - Phase 2 is located at 9700 US 290, Austin, TX, 78754, in Travis County.
Who is the owner or developer of AMAT B41 CSG Lab Expansion - Phase 2?
Applied Materials is the property owner/developer of record for AMAT B41 CSG Lab Expansion - Phase 2, per its TDLR project registration.
Who is the architect or design firm for AMAT B41 CSG Lab Expansion - Phase 2?
Fuse Architecture Studio is the design firm of record for AMAT B41 CSG Lab Expansion - Phase 2, according to its TDLR filing.
How much does AMAT B41 CSG Lab Expansion - Phase 2 cost and how big is it?
AMAT B41 CSG Lab Expansion - Phase 2 has an estimated construction value of $1.0M and approximately 10,000 square feet (about $100/sqft), based on its TDLR filing.
📋Scope of Work
Conversion of warehouse space into an expansion of the CSG Lab. The lab expansion will include the removal of the temporary partition installed as part of Phase 1 to create one large lab area.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Aug 25, 2022
Review Complete
Inspection Complete
Closed
Oct 1, 2023
🔗Related Projects
👤Same Owner
$3.0M total📄Related City Permits
Building permits found at or near this location
Interior remodel 2nd floor areas at existing manufacturing facility- Etch Paros
Interior remodel 2nd floor areas at existing manufacturing facility- Etch Paros
Interior remodel 2nd floor areas at existing manufacturing facility- Etch Paros
Rip and replace fiber optic cable on cell tower ground cabinets trenching for new conduit.
INSTALL NEW 200 AMP PANELBOARD FOR B34 CSMG MF TEST BAY.