Project has been completed and closed
NXP Modify H-1616 for TEM-02 Install - Oak Hill is a Renovation/Alteration project located at 6501 William Cannon Drive, Austin, TX 78735 in Austin, Texas. The project has an estimated value of $300K covering 2,500 sq ft. NXP Semiconductors is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on November 29, 2022.
MODIFY H-1616 TO ALLOW FOR THE INSTALLATION OF NEW TRANSMISSION ELECTRON MICROSCOPE (TEM-02). RECONFIGURE WALL LAYOUT, ADD DOORS, MODIFY DROP-CEILING GRID, LIGHTING AND HVCAC.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Nov 29, 2022
Review Complete
Inspection Complete
Closed
Jan 31, 2023
Building permits found at or near this location
Replacement of complete existing central heat and air system with or without duct work
Upgrade residential main service from 200amps to 400amps (two 200amps panels 320A meter riser replacement to 3). Overhead drop not required to be replaced. AUSTIN 2 MILE ETJ
Total demo of SFR 1483 sq ft circa 1960 ***The building shall not be demolished until after the contractor has fulfilled the neighbor notification requirements outlined in Steps 5 & 6 of the Demolition webpage.***
Total demo of SFR 1483 sq ft circa 1960 ***The building shall not be demolished until after the contractor has fulfilled the neighbor notification requirements outlined in Steps 5 & 6 of the Demolition webpage.***
Replacement of complete existing central heat and air system with or without duct work
