Project has been completed and closed
NXP SE Annex P5 Oak Hill is a Renovation/Alteration project located at 6501 W. William Cannon, Austin, TX 78735 in Austin, Texas. The project has an estimated value of $2.0M covering 7,075 sq ft. NXP Semiconductors is the property owner and Studio 8 architects is the design firm of record. The project was registered with TDLR on July 17, 2023.
Project is demolishing and renovating an existing cleanroom layout into a new cleanroom design. Primary occupancy is unchanged.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Jul 17, 2023
Review Complete
Inspection Complete
Closed
Sep 15, 2023
Building permits found at or near this location
Replacement of complete existing central heat and air system with or without duct work
Total demo of SFR 1483 sq ft circa 1960 ***The building shall not be demolished until after the contractor has fulfilled the neighbor notification requirements outlined in Steps 5 & 6 of the Demolition webpage.***
Upgrade residential main service from 200amps to 400amps (two 200amps panels 320A meter riser replacement to 3). Overhead drop not required to be replaced. AUSTIN 2 MILE ETJ
Total demo of SFR 1483 sq ft circa 1960 ***The building shall not be demolished until after the contractor has fulfilled the neighbor notification requirements outlined in Steps 5 & 6 of the Demolition webpage.***
Replacement of complete existing central heat and air system with or without duct work
