Under construction📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

Dent Shop Metal Building

2565 E 2nd St., Odessa, TX 79761, Odessa, TX, 79761

Dent Shop Metal Building is a new construction project at 2565 E 2nd St., Odessa, in Ector County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $140K across about 2,625 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2023011914

$140K

Project Value

2,625

Square Feet

$53/sqft

Cost/SqFt

6 months

Duration

Registered:Feb 15, 2023

Start:Feb 21, 2023

Target:Aug 21, 2023

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Dent Shop Metal Building is a New Construction project located at 2565 E 2nd St., Odessa, TX 79761 in Odessa, Texas. The project has an estimated value of $140K covering 2,625 sq ft. Patrick Overby is the property owner and Standard Structures Inc. is the design firm of record. The project was registered with TDLR on February 15, 2023.

❓Frequently Asked Questions

What is Dent Shop Metal Building?

Dent Shop Metal Building is a new construction project at 2565 E 2nd St. in Odessa, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Prep pad, foundation, errect metal building

Is Dent Shop Metal Building open in Odessa?

Dent Shop Metal Building is currently under construction in Odessa, TX. Its current TDLR status is "Project Registered".

Where is Dent Shop Metal Building located?

Dent Shop Metal Building is located at 2565 E 2nd St., Odessa, TX, 79761, in Ector County.

Who is the owner or developer of Dent Shop Metal Building?

Patrick Overby is the property owner/developer of record for Dent Shop Metal Building, per its TDLR project registration.

Who is the architect or design firm for Dent Shop Metal Building?

Standard Structures Inc. is the design firm of record for Dent Shop Metal Building, according to its TDLR filing.

How much does Dent Shop Metal Building cost and how big is it?

Dent Shop Metal Building has an estimated construction value of $140K and approximately 2,625 square feet (about $53/sqft), based on its TDLR filing.

📋Scope of Work

Prep pad, foundation, errect metal building

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.