Final inspection completed, awaiting project closure
NXP Oak Hill: Relocate Backflow Preventers Building A is a Renovation/Alteration project located at 6501 William Cannon Drive, Austin, TX 78735 in Austin, Texas. The project has an estimated value of $50K covering 500 sq ft. NXP is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on March 9, 2023.
Relocate existing backflow preventers on industrial city water system in Building A to more accessible locations.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Mar 9, 2023
Review Complete
Mar 9, 2023
Inspection Complete
Apr 23, 2026
Closed
1141d
Construction phase
Building permits found at or near this location
Replacement of complete existing central heat and air system with or without duct work
Upgrade residential main service from 200amps to 400amps (two 200amps panels 320A meter riser replacement to 3). Overhead drop not required to be replaced. AUSTIN 2 MILE ETJ
Total demo of SFR 1483 sq ft circa 1960 ***The building shall not be demolished until after the contractor has fulfilled the neighbor notification requirements outlined in Steps 5 & 6 of the Demolition webpage.***
Total demo of SFR 1483 sq ft circa 1960 ***The building shall not be demolished until after the contractor has fulfilled the neighbor notification requirements outlined in Steps 5 & 6 of the Demolition webpage.***
Replacement of complete existing central heat and air system with or without duct work
