Under construction📋Project Registered🔧 Additions to Existing Building💵 This project is privately funded, on private land for private use.

Pallet and Mole Rack

1800 Waters Ridge Drive Suite 500, Lewisville, TX 75057, Lewisville, TX, 75057

Pallet and Mole Rack is a additions to existing building project at 1800 Waters Ridge Drive Suite 500, Lewisville, in Denton County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $740K across about 30,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2023022752

$740K

Project Value

30,000

Square Feet

$25/sqft

Cost/SqFt

8 months

Duration

Registered:Jul 3, 2023

Start:Feb 1, 2023

Target:Sep 30, 2023

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Pallet and Mole Rack is a Additions to Existing Building project located at 1800 Waters Ridge Drive Suite 500, Lewisville, TX 75057 in Lewisville, Texas. The project has an estimated value of $740K covering 30,000 sq ft. CBRE is the property owner and FRAZIER INDUSTRIAL CO. is the design firm of record. The project was registered with TDLR on July 3, 2023.

❓Frequently Asked Questions

What is Pallet and Mole Rack?

Pallet and Mole Rack is a additions to existing building project at 1800 Waters Ridge Drive Suite 500 in Lewisville, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Install new pallet and mole racking

Is Pallet and Mole Rack open in Lewisville?

Pallet and Mole Rack is currently under construction in Lewisville, TX. Its current TDLR status is "Project Registered".

Where is Pallet and Mole Rack located?

Pallet and Mole Rack is located at 1800 Waters Ridge Drive Suite 500, Lewisville, TX, 75057, in Denton County.

Who is the owner or developer of Pallet and Mole Rack?

CBRE is the property owner/developer of record for Pallet and Mole Rack, per its TDLR project registration.

Who is the architect or design firm for Pallet and Mole Rack?

FRAZIER INDUSTRIAL CO. is the design firm of record for Pallet and Mole Rack, according to its TDLR filing.

How much does Pallet and Mole Rack cost and how big is it?

Pallet and Mole Rack has an estimated construction value of $740K and approximately 30,000 square feet (about $25/sqft), based on its TDLR filing.

📋Scope of Work

Install new pallet and mole racking

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.