Schenker Hutto Clean Room
Schenker Hutto Clean Room is a renovation/alteration project at 600 Schneider Blvd - Suite 200, Hutto, in Williamson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Nov 2023). The project has an estimated value of $150K across about 1,700 sq ft.
๐Project Metrics
TDLR #TABS2024003221Project Closed
Project has been completed and closed
Schenker Hutto Clean Room is a Renovation/Alteration project located at 600 Schneider Blvd - Suite 200, Hutto, TX 78634 in Hutto, Texas. The project has an estimated value of $150K covering 1,700 sq ft. Centerpointe Properties (landlord) is the property owner. The project was registered with TDLR on October 16, 2023.
โFrequently Asked Questions
What is Schenker Hutto Clean Room?
Schenker Hutto Clean Room is a renovation/alteration project at 600 Schneider Blvd - Suite 200 in Hutto, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Addition of a modular self-standing Cela Room facility for cleaning tooling used in the manufacture of hi-tech semi-conductor lithography machines
Is Schenker Hutto Clean Room open in Hutto?
Construction on Schenker Hutto Clean Room is complete โ TDLR records show the project passed its required accessibility inspection in Nov 2023. The building is finished and very likely open.
Where is Schenker Hutto Clean Room located?
Schenker Hutto Clean Room is located at 600 Schneider Blvd - Suite 200, Hutto, TX, 78634, in Williamson County.
Who is the owner or developer of Schenker Hutto Clean Room?
Centerpointe Properties (landlord) is the property owner/developer of record for Schenker Hutto Clean Room, per its TDLR project registration.
How much does Schenker Hutto Clean Room cost and how big is it?
Schenker Hutto Clean Room has an estimated construction value of $150K and approximately 1,700 square feet (about $88/sqft), based on its TDLR filing.
๐Scope of Work
Addition of a modular self-standing Cela Room facility for cleaning tooling used in the manufacture of hi-tech semi-conductor lithography machines
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
๐ Compliance Timeline
๐ Project Timeline
Filed
Oct 16, 2023
Review Complete
Inspection Complete
Closed
Nov 20, 2023
๐Related City Permits
Building permits found at or near this location
Demo old driveway. Construct new driveway approach of 19.9 FT
3-bedroom 2.5 bath rowhouse. SMART housing
3-bedroom 2.5 bath s2 story row-house. SMART housing
Replacement of complete existing central heat and air system with or without duct work
(Phillips Clint) - INSTALLATION OF CIRCUIT FOR ELEC. VEHICLE CHARGING STATION - ESIP