Construction complete · Oct 2024✅Inspection Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Fab Shop

635 E Lone Star, Mustang Ridge, TX 78610, Mustang Ridge, TX, 78610

Fab Shop is a new construction project at 635 E Lone Star, Mustang Ridge, in Caldwell County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2024). The project has an estimated value of $1.5M across about 35,000 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2024010239

$1.5M

Project Value

35,000

Square Feet

$43/sqft

Cost/SqFt

8 months

Duration

Registered:Jan 26, 2024

Start:Feb 1, 2024

Target:Oct 1, 2024

✅

Inspection Complete

Final inspection completed, awaiting project closure

Fab Shop is a New Construction project located at 635 E Lone Star, Mustang Ridge, TX 78610 in Mustang Ridge, Texas. The project has an estimated value of $1.5M covering 35,000 sq ft. Reinforcing Steel Supply is the property owner and T Bar T Construction Inc is the design firm of record. The project was registered with TDLR on January 26, 2024.

❓Frequently Asked Questions

What is Fab Shop?

Fab Shop is a new construction project at 635 E Lone Star in Mustang Ridge, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: construction of a 35,000 sf steel fabrication shop

Is Fab Shop open in Mustang Ridge?

Construction on Fab Shop is complete — TDLR records show the project passed its required accessibility inspection in Oct 2024. The building is finished and very likely open.

Where is Fab Shop located?

Fab Shop is located at 635 E Lone Star, Mustang Ridge, TX, 78610, in Caldwell County.

Who is the owner or developer of Fab Shop?

Reinforcing Steel Supply is the property owner/developer of record for Fab Shop, per its TDLR project registration.

Who is the architect or design firm for Fab Shop?

T Bar T Construction Inc is the design firm of record for Fab Shop, according to its TDLR filing.

How much does Fab Shop cost and how big is it?

Fab Shop has an estimated construction value of $1.5M and approximately 35,000 square feet (about $43/sqft), based on its TDLR filing.

📋Scope of Work

construction of a 35,000 sf steel fabrication shop

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.