Construction complete · May 2026✅Inspection Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

SHIPYARD SUPPLY WELDING SHOP

930 E SAM HOUSTON PKWY BLDG 2, Pasadena, TX 77503, Pasadena, TX, 77503

SHIPYARD SUPPLY WELDING SHOP is a new construction project at 930 E SAM HOUSTON PKWY BLDG 2, Pasadena, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed May 2026). The project has an estimated value of $400K across about 7,500 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2024016200

$400K

Project Value

7,500

Square Feet

$53/sqft

Cost/SqFt

10 months

Duration

Registered:Apr 15, 2024

Start:Jun 14, 2024

Target:Apr 14, 2025

✅

Inspection Complete

Final inspection completed, awaiting project closure

SHIPYARD SUPPLY WELDING SHOP is a New Construction project located at 930 E SAM HOUSTON PKWY BLDG 2, Pasadena, TX 77503 in Pasadena, Texas. The project has an estimated value of $400K covering 7,500 sq ft. HAMMWICK LLC is the property owner. The project was registered with TDLR on April 15, 2024.

❓Frequently Asked Questions

What is SHIPYARD SUPPLY WELDING SHOP?

SHIPYARD SUPPLY WELDING SHOP is a new construction project at 930 E SAM HOUSTON PKWY BLDG 2 in Pasadena, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: PEB WELDING SHOP

Is SHIPYARD SUPPLY WELDING SHOP open in Pasadena?

Construction on SHIPYARD SUPPLY WELDING SHOP is complete — TDLR records show the project passed its required accessibility inspection in May 2026. The building is finished and very likely open.

Where is SHIPYARD SUPPLY WELDING SHOP located?

SHIPYARD SUPPLY WELDING SHOP is located at 930 E SAM HOUSTON PKWY BLDG 2, Pasadena, TX, 77503, in Harris County.

Who is the owner or developer of SHIPYARD SUPPLY WELDING SHOP?

HAMMWICK LLC is the property owner/developer of record for SHIPYARD SUPPLY WELDING SHOP, per its TDLR project registration.

How much does SHIPYARD SUPPLY WELDING SHOP cost and how big is it?

SHIPYARD SUPPLY WELDING SHOP has an estimated construction value of $400K and approximately 7,500 square feet (about $53/sqft), based on its TDLR filing.

📋Scope of Work

PEB WELDING SHOP

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.