Construction complete · Dec 2024🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Spec Suite 360

6363 North State Hwy 161, Irving, TX 75038, Irving, TX, 75038

Spec Suite 360 is a renovation/alteration project at 6363 North State Hwy 161, Irving, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Dec 2024). The project has an estimated value of $436K across about 4,111 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2024024988

$436K

Project Value

4,111

Square Feet

$106/sqft

Cost/SqFt

5 months

Duration

Registered:Aug 8, 2024

Start:Aug 12, 2024

Target:Dec 31, 2024

🏁

Project Closed

Project has been completed and closed

Spec Suite 360 is a Renovation/Alteration project located at 6363 North State Hwy 161, Irving, TX 75038 in Irving, Texas. The project has an estimated value of $436K covering 4,111 sq ft. Piedmont Office Realty Trust is the property owner and Entos Design is the design firm of record. The project was registered with TDLR on August 8, 2024.

❓Frequently Asked Questions

What is Spec Suite 360?

Spec Suite 360 is a renovation/alteration project at 6363 North State Hwy 161 in Irving, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Tenant Improvement

Is Spec Suite 360 open in Irving?

Construction on Spec Suite 360 is complete — TDLR records show the project passed its required accessibility inspection in Dec 2024. The building is finished and very likely open.

Where is Spec Suite 360 located?

Spec Suite 360 is located at 6363 North State Hwy 161, Irving, TX, 75038, in Dallas County.

Who is the owner or developer of Spec Suite 360?

Piedmont Office Realty Trust is the property owner/developer of record for Spec Suite 360, per its TDLR project registration.

Who is the architect or design firm for Spec Suite 360?

Entos Design is the design firm of record for Spec Suite 360, according to its TDLR filing.

How much does Spec Suite 360 cost and how big is it?

Spec Suite 360 has an estimated construction value of $436K and approximately 4,111 square feet (about $106/sqft), based on its TDLR filing.

📋Scope of Work

Tenant Improvement

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.