Construction complete · Apr 2025🏁Project Closed🔧 Renovation/Alteration💵 This project involves public funds, public land, or is a Federally funded roadway project.

Machinify

8333 Douglas Ave, Suite 600, Dallas, TX 75225, Dallas, TX, 75225

Machinify is a renovation/alteration project at 8333 Douglas Ave, Suite 600, Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Apr 2025). The project has an estimated value of $696K across about 7,579 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2025015755

$696K

Project Value

7,579

Square Feet

$92/sqft

Cost/SqFt

5 months

Duration

Registered:Apr 2, 2025

Start:Apr 7, 2025

Target:Aug 28, 2025

🏁

Project Closed

Project has been completed and closed

Machinify is a Renovation/Alteration project located at 8333 Douglas Ave, Suite 600, Dallas, TX 75225 in Dallas, Texas. The project has an estimated value of $696K covering 7,579 sq ft. Douglas Center - HP, LP is the property owner and Entos Design is the design firm of record. The project was registered with TDLR on April 2, 2025.

❓Frequently Asked Questions

What is Machinify?

Machinify is a renovation/alteration project at 8333 Douglas Ave, Suite 600 in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: 7,579 SF of tenant improvement.

Is Machinify open in Dallas?

Construction on Machinify is complete — TDLR records show the project passed its required accessibility inspection in Apr 2025. The building is finished and very likely open.

Where is Machinify located?

Machinify is located at 8333 Douglas Ave, Suite 600, Dallas, TX, 75225, in Dallas County.

Who is the owner or developer of Machinify?

Douglas Center - HP, LP is the property owner/developer of record for Machinify, per its TDLR project registration.

Who is the architect or design firm for Machinify?

Entos Design is the design firm of record for Machinify, according to its TDLR filing.

How much does Machinify cost and how big is it?

Machinify has an estimated construction value of $696K and approximately 7,579 square feet (about $92/sqft), based on its TDLR filing.

📋Scope of Work

7,579 SF of tenant improvement.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.