Opening ~Sep 2026Project Registered Renovation/Alteration This project is privately funded, on private land for private use.

Scalar Gauge

5950 Sherry Lane Suite 214, Dallas, TX 75225, Dallas, TX, 75225

Scalar Gauge is a renovation/alteration project at 5950 Sherry Lane Suite 214, Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Sep 2026. The project has an estimated value of $219K across about 1,447 sq ft.

Pre-Construction15%

Project Metrics

TDLR #TABS2026024310

$219K

Project Value

1,447

Square Feet

$151/sqft

Cost/SqFt

2 months

Duration

Registered:Jul 1, 2026

Start:Jul 20, 2026

Target:Sep 18, 2026

Remaining:17 days

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Follow this project

Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.

Or watch all projects in 75225 (Dallas)

One email per change. Unsubscribe in one click. Privacy.

Scalar Gauge is a Renovation/Alteration project located at 5950 Sherry Lane Suite 214, Dallas, TX 75225 in Dallas, Texas. The project has an estimated value of $219K covering 1,447 sq ft. 5950 Sherry Property, LLC is the property owner and Entos Design is the design firm of record. The project was registered with TDLR on July 1, 2026.

Frequently Asked Questions

What is Scalar Gauge?

Scalar Gauge is a renovation/alteration project at 5950 Sherry Lane Suite 214 in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Tenant Improvement

Is Scalar Gauge open in Dallas?

Scalar Gauge is still under construction in Dallas, TX, with an estimated completion of Sep 2026 according to its TDLR registration.

Where is Scalar Gauge located?

Scalar Gauge is located at 5950 Sherry Lane Suite 214, Dallas, TX, 75225, in Dallas County.

Who is the owner or developer of Scalar Gauge?

5950 Sherry Property, LLC is the property owner/developer of record for Scalar Gauge, per its TDLR project registration.

Who is the architect or design firm for Scalar Gauge?

Entos Design is the design firm of record for Scalar Gauge, according to its TDLR filing.

How much does Scalar Gauge cost and how big is it?

Scalar Gauge has an estimated construction value of $219K and approximately 1,447 square feet (about $151/sqft), based on its TDLR filing.

Scope of Work

Tenant Improvement

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.