Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Pamela Printing

4791 Lexington, Missouri City, TX 77459, Missouri City, TX, 77459

Pamela Printing is a renovation/alteration project at 4791 Lexington, Missouri City, in Fort Bend County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $220K across about 6,000 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025018404

$220K

Project Value

6,000

Square Feet

$37/sqft

Cost/SqFt

2 months

Duration

Registered:May 7, 2025

Start:Jun 1, 2025

Target:Aug 1, 2025

📝

Review Complete

Design review complete, construction may proceed

Pamela Printing is a Renovation/Alteration project located at 4791 Lexington, Missouri City, TX 77459 in Missouri City, Texas. The project has an estimated value of $220K covering 6,000 sq ft. TVALC, LLC is the property owner and Carter Architects, Inc. is the design firm of record. The project was registered with TDLR on May 7, 2025.

❓Frequently Asked Questions

What is Pamela Printing?

Pamela Printing is a renovation/alteration project at 4791 Lexington in Missouri City, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior remodel of an existing lease space in a retail building.

Is Pamela Printing open in Missouri City?

Pamela Printing is currently under construction in Missouri City, TX. Its current TDLR status is "Review Complete".

Where is Pamela Printing located?

Pamela Printing is located at 4791 Lexington, Missouri City, TX, 77459, in Fort Bend County.

Who is the owner or developer of Pamela Printing?

TVALC, LLC is the property owner/developer of record for Pamela Printing, per its TDLR project registration.

Who is the architect or design firm for Pamela Printing?

Carter Architects, Inc. is the design firm of record for Pamela Printing, according to its TDLR filing.

How much does Pamela Printing cost and how big is it?

Pamela Printing has an estimated construction value of $220K and approximately 6,000 square feet (about $37/sqft), based on its TDLR filing.

📋Scope of Work

Interior remodel of an existing lease space in a retail building.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.