801 Barton Springs Level 6 (Stair Infill and Corridor)
801 Barton Springs Level 6 (Stair Infill and Corridor) is a renovation/alteration project at 801 Barton Springs Level 6, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $250K across about 1,665 sq ft.
📊Project Metrics
TDLR #TABS2026004381Review Complete
Design review complete, construction may proceed
801 Barton Springs Level 6 (Stair Infill and Corridor) is a Renovation/Alteration project located at 801 Barton Springs Level 6, Austin, TX 78704 in Austin, Texas. The project has an estimated value of $250K covering 1,665 sq ft. 801 Barton Springs Propco, LLC is the property owner and Corgan is the design firm of record. The project was registered with TDLR on October 28, 2025.
❓Frequently Asked Questions
What is 801 Barton Springs Level 6 (Stair Infill and Corridor)?
801 Barton Springs Level 6 (Stair Infill and Corridor) is a renovation/alteration project at 801 Barton Springs Level 6 in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Demolition of Existing Stair and providing Infill. Creating a common corridor withing existing full floor footprint for Spec Suites.
Is 801 Barton Springs Level 6 (Stair Infill and Corridor) open in Austin?
801 Barton Springs Level 6 (Stair Infill and Corridor) is currently under construction in Austin, TX. Its current TDLR status is "Review Complete".
Where is 801 Barton Springs Level 6 (Stair Infill and Corridor) located?
801 Barton Springs Level 6 (Stair Infill and Corridor) is located at 801 Barton Springs Level 6, Austin, TX, 78704, in Travis County.
Who is the owner or developer of 801 Barton Springs Level 6 (Stair Infill and Corridor)?
801 Barton Springs Propco, LLC is the property owner/developer of record for 801 Barton Springs Level 6 (Stair Infill and Corridor), per its TDLR project registration.
Who is the architect or design firm for 801 Barton Springs Level 6 (Stair Infill and Corridor)?
Corgan is the design firm of record for 801 Barton Springs Level 6 (Stair Infill and Corridor), according to its TDLR filing.
How much does 801 Barton Springs Level 6 (Stair Infill and Corridor) cost and how big is it?
801 Barton Springs Level 6 (Stair Infill and Corridor) has an estimated construction value of $250K and approximately 1,665 square feet (about $150/sqft), based on its TDLR filing.
📋Scope of Work
Demolition of Existing Stair and providing Infill. Creating a common corridor withing existing full floor footprint for Spec Suites.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Oct 28, 2025
Review Complete
Jan 4, 2026
Inspection Complete
Closed
68d
Review duration
🔗Related Projects
👤Same Owner
$1.5M total📄Related City Permits
Building permits found at or near this location
New construction in-ground pool and spa.
Install new 8.925kW rooftop solar system and 11.5kW energy storage system for existing residential only
Replacement of complete existing central heat and air system with or without duct work
New 2-story single family residence condo 3 bed/2.5 bath with attached garage covered porch and patio
Spec suite on level 6. Existing Break Room with updated finishes only. Renovating existing worksharing layout to become spec suite office space with conference room offices phone rooms and support spaces.Access control plan provided as separate attachments. Existing lighting to be relocated/reused. (Suite 600 615 625 and 635) Spec suite corridor and existing stair infill on level 6 (within unit 635). Building core is existing to remain. Corridor finish refresh. Demo two doors. Access control plan not part of corridor and stair scope. No access control requested. Existing stair to be demolished and infilled. (FLR 6)