Opening ~Aug 2027📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

Ramiro Solis Construction Plaza

510 E Cano St., Edinburg, TX 78542, Edinburg, TX, 78542

Ramiro Solis Construction Plaza is a new construction project at 510 E Cano St., Edinburg, in Hidalgo County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Aug 2027. The project has an estimated value of $100K across about 3,909 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026022382

$100K

Project Value

3,909

Square Feet

$26/sqft

Cost/SqFt

1 year

Duration

Registered:Jun 9, 2026

Start:Aug 1, 2026

Target:Aug 1, 2027

Remaining:361 days

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Ramiro Solis Construction Plaza is a New Construction project located at 510 E Cano St., Edinburg, TX 78542 in Edinburg, Texas. The project has an estimated value of $100K covering 3,909 sq ft. Ramiro Solis Construction Inc. is the property owner and Cesar Hernandez Design is the design firm of record. The project was registered with TDLR on June 9, 2026.

❓Frequently Asked Questions

What is Ramiro Solis Construction Plaza?

Ramiro Solis Construction Plaza is a new construction project at 510 E Cano St. in Edinburg, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New construction commercial plaza.

Is Ramiro Solis Construction Plaza open in Edinburg?

Ramiro Solis Construction Plaza is still under construction in Edinburg, TX, with an estimated completion of Aug 2027 according to its TDLR registration.

Where is Ramiro Solis Construction Plaza located?

Ramiro Solis Construction Plaza is located at 510 E Cano St., Edinburg, TX, 78542, in Hidalgo County.

Who is the owner or developer of Ramiro Solis Construction Plaza?

Ramiro Solis Construction Inc. is the property owner/developer of record for Ramiro Solis Construction Plaza, per its TDLR project registration.

Who is the architect or design firm for Ramiro Solis Construction Plaza?

Cesar Hernandez Design is the design firm of record for Ramiro Solis Construction Plaza, according to its TDLR filing.

How much does Ramiro Solis Construction Plaza cost and how big is it?

Ramiro Solis Construction Plaza has an estimated construction value of $100K and approximately 3,909 square feet (about $26/sqft), based on its TDLR filing.

📋Scope of Work

New construction commercial plaza.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.