Opening ~Jan 2027📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

Electus Finish Outs

4205 Glenview Dr, Haltom City, TX 76117, Haltom City, TX, 76117

Electus Finish Outs is a new construction project at 4205 Glenview Dr, Haltom City, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Jan 2027. The project has an estimated value of $385K across about 10,286 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026026741

$385K

Project Value

10,286

Square Feet

$37/sqft

Cost/SqFt

4 months

Duration

Registered:Aug 3, 2026

Start:Sep 21, 2026

Target:Jan 4, 2027

Remaining:151 days

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Electus Finish Outs is a New Construction project located at 4205 Glenview Dr, Haltom City, TX 76117 in Haltom City, Texas. The project has an estimated value of $385K covering 10,286 sq ft. FourTwo Park, LLC is the property owner and 97w is the design firm of record. The project was registered with TDLR on August 3, 2026.

❓Frequently Asked Questions

What is Electus Finish Outs?

Electus Finish Outs is a new construction project at 4205 Glenview Dr in Haltom City, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Tenant finish out of existing shell space. Includes mechanical, electrical, and plumbing.

Is Electus Finish Outs open in Haltom City?

Electus Finish Outs is still under construction in Haltom City, TX, with an estimated completion of Jan 2027 according to its TDLR registration.

Where is Electus Finish Outs located?

Electus Finish Outs is located at 4205 Glenview Dr, Haltom City, TX, 76117, in Tarrant County.

Who is the owner or developer of Electus Finish Outs?

FourTwo Park, LLC is the property owner/developer of record for Electus Finish Outs, per its TDLR project registration.

Who is the architect or design firm for Electus Finish Outs?

97w is the design firm of record for Electus Finish Outs, according to its TDLR filing.

How much does Electus Finish Outs cost and how big is it?

Electus Finish Outs has an estimated construction value of $385K and approximately 10,286 square feet (about $37/sqft), based on its TDLR filing.

📋Scope of Work

Tenant finish out of existing shell space. Includes mechanical, electrical, and plumbing.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.