Construction complete · Jun 2010🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

AUTOCLAVE 6 & 7

8301 MARS DRIVE, Waco, TX 76712, Waco, TX, 76712

AUTOCLAVE 6 & 7 is a renovation/alteration project at 8301 MARS DRIVE, Waco, in McLennan County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jun 2010). The project has an estimated value of $1.5M.

Completed100%

📊Project Metrics

TDLR #EABPRJB0801182

$1.5M

Project Value

—

Square Feet

—

Cost/SqFt

8 months

Duration

Registered:Sep 29, 2009

Start:Oct 1, 2009

Target:Jun 1, 2010

🏁

Project Closed

Project has been completed and closed

Follow this project

Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.

Or watch all projects in 76712 (Waco)

One email per change. Unsubscribe in one click. Privacy.

AUTOCLAVE 6 & 7 is a Renovation/Alteration project located at 8301 MARS DRIVE, Waco, TX 76712 in Waco, Texas. The project has an estimated value of $1.5M. ALLERGAN is the property owner and CRB CONSULTING ENGINEERS is the design firm of record. The project was registered with TDLR on September 29, 2009.

❓Frequently Asked Questions

What is AUTOCLAVE 6 & 7?

AUTOCLAVE 6 & 7 is a renovation/alteration project at 8301 MARS DRIVE in Waco, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Installation of two new autoclaves in an existing process area.

Is AUTOCLAVE 6 & 7 open in Waco?

Construction on AUTOCLAVE 6 & 7 is complete — TDLR records show the project passed its required accessibility inspection in Jun 2010. The building is finished and very likely open.

Where is AUTOCLAVE 6 & 7 located?

AUTOCLAVE 6 & 7 is located at 8301 MARS DRIVE, Waco, TX, 76712, in McLennan County.

Who is the owner or developer of AUTOCLAVE 6 & 7?

ALLERGAN is the property owner/developer of record for AUTOCLAVE 6 & 7, per its TDLR project registration.

Who is the architect or design firm for AUTOCLAVE 6 & 7?

CRB CONSULTING ENGINEERS is the design firm of record for AUTOCLAVE 6 & 7, according to its TDLR filing.

How much does AUTOCLAVE 6 & 7 cost and how big is it?

AUTOCLAVE 6 & 7 has an estimated construction value of $1.5M, based on its TDLR filing.

📋Scope of Work

Installation of two new autoclaves in an existing process area.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.