Construction complete · Jul 2011🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

CORNERSTONE AUTOMATION

10351 HOME RD., Frisco, TX 75034, Frisco, TX, 75034

CORNERSTONE AUTOMATION is a renovation/alteration project at 10351 HOME RD., Frisco, in Collin County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jul 2011). The project has an estimated value of $250K.

Completed100%

📊Project Metrics

TDLR #EABPRJB1812002

$250K

Project Value

—

Square Feet

—

Cost/SqFt

2 months

Duration

Registered:May 13, 2011

Start:May 1, 2011

Target:Jul 1, 2011

🏁

Project Closed

Project has been completed and closed

CORNERSTONE AUTOMATION is a Renovation/Alteration project located at 10351 HOME RD., Frisco, TX 75034 in Frisco, Texas. The project has an estimated value of $250K. CB RICHARD ELLIS is the property owner and DOUG PALIS is the design firm of record. The project was registered with TDLR on May 13, 2011.

❓Frequently Asked Questions

What is CORNERSTONE AUTOMATION?

CORNERSTONE AUTOMATION is a renovation/alteration project at 10351 HOME RD. in Frisco, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Add new office expansion and remodel existing office area.

Is CORNERSTONE AUTOMATION open in Frisco?

Construction on CORNERSTONE AUTOMATION is complete — TDLR records show the project passed its required accessibility inspection in Jul 2011. The building is finished and very likely open.

Where is CORNERSTONE AUTOMATION located?

CORNERSTONE AUTOMATION is located at 10351 HOME RD., Frisco, TX, 75034, in Collin County.

Who is the owner or developer of CORNERSTONE AUTOMATION?

CB RICHARD ELLIS is the property owner/developer of record for CORNERSTONE AUTOMATION, per its TDLR project registration.

Who is the architect or design firm for CORNERSTONE AUTOMATION?

DOUG PALIS is the design firm of record for CORNERSTONE AUTOMATION, according to its TDLR filing.

How much does CORNERSTONE AUTOMATION cost and how big is it?

CORNERSTONE AUTOMATION has an estimated construction value of $250K, based on its TDLR filing.

📋Scope of Work

Add new office expansion and remodel existing office area.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.