Construction complete · May 2014🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

HOUSTON CENTER VALVE & FITTING

10110 FAIRBANKS NORTH HOUSTON, Houston, TX 77064, Houston, TX, 77064

HOUSTON CENTER VALVE & FITTING is a new construction project at 10110 FAIRBANKS NORTH HOUSTON, Houston, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed May 2014). The project has an estimated value of $352K.

Completed100%

📊Project Metrics

TDLR #EABPRJB4806156

$352K

Project Value

—

Square Feet

—

Cost/SqFt

4 months

Duration

Registered:Dec 17, 2013

Start:Jan 1, 2014

Target:May 1, 2014

🏁

Project Closed

Project has been completed and closed

HOUSTON CENTER VALVE & FITTING is a New Construction project located at 10110 FAIRBANKS NORTH HOUSTON, Houston, TX 77064 in Houston, Texas. The project has an estimated value of $352K. BRIAN PAYNE is the property owner and PROEM DESIGN-BUILD INC. is the design firm of record. The project was registered with TDLR on December 17, 2013.

❓Frequently Asked Questions

What is HOUSTON CENTER VALVE & FITTING?

HOUSTON CENTER VALVE & FITTING is a new construction project at 10110 FAIRBANKS NORTH HOUSTON in Houston, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior build-out in an existing shell building.

Is HOUSTON CENTER VALVE & FITTING open in Houston?

Construction on HOUSTON CENTER VALVE & FITTING is complete — TDLR records show the project passed its required accessibility inspection in May 2014. The building is finished and very likely open.

Where is HOUSTON CENTER VALVE & FITTING located?

HOUSTON CENTER VALVE & FITTING is located at 10110 FAIRBANKS NORTH HOUSTON, Houston, TX, 77064, in Harris County.

Who is the owner or developer of HOUSTON CENTER VALVE & FITTING?

BRIAN PAYNE is the property owner/developer of record for HOUSTON CENTER VALVE & FITTING, per its TDLR project registration.

Who is the architect or design firm for HOUSTON CENTER VALVE & FITTING?

PROEM DESIGN-BUILD INC. is the design firm of record for HOUSTON CENTER VALVE & FITTING, according to its TDLR filing.

How much does HOUSTON CENTER VALVE & FITTING cost and how big is it?

HOUSTON CENTER VALVE & FITTING has an estimated construction value of $352K, based on its TDLR filing.

📋Scope of Work

Interior build-out in an existing shell building.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.