CHATSWORTH PRODUCTS INC, PHASE IV
CHATSWORTH PRODUCTS INC, PHASE IV is a additions to existing building project at 3004 S. AUSTIN AVE, Georgetown, in Williamson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Apr 2016). The project has an estimated value of $850K.
📊Project Metrics
TDLR #EABPRJB5813054Project Closed
Project has been completed and closed
CHATSWORTH PRODUCTS INC, PHASE IV is a Additions to Existing Building project located at 3004 S. AUSTIN AVE, Georgetown, TX 78626 in Georgetown, Texas. The project has an estimated value of $850K. CHATSWORTH PRODUCTS INC. is the property owner and ELSASSER ARCHITECTURAL INC. is the design firm of record. The project was registered with TDLR on April 2, 2015.
❓Frequently Asked Questions
What is CHATSWORTH PRODUCTS INC, PHASE IV?
CHATSWORTH PRODUCTS INC, PHASE IV is a additions to existing building project at 3004 S. AUSTIN AVE in Georgetown, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Addition of 18,500 sq. ft. manufacturing/storage building onto an existing 50,000 sq. f.t manufacturing/storage
Is CHATSWORTH PRODUCTS INC, PHASE IV open in Georgetown?
Construction on CHATSWORTH PRODUCTS INC, PHASE IV is complete — TDLR records show the project passed its required accessibility inspection in Apr 2016. The building is finished and very likely open.
Where is CHATSWORTH PRODUCTS INC, PHASE IV located?
CHATSWORTH PRODUCTS INC, PHASE IV is located at 3004 S. AUSTIN AVE, Georgetown, TX, 78626, in Williamson County.
Who is the owner or developer of CHATSWORTH PRODUCTS INC, PHASE IV?
CHATSWORTH PRODUCTS INC. is the property owner/developer of record for CHATSWORTH PRODUCTS INC, PHASE IV, per its TDLR project registration.
Who is the architect or design firm for CHATSWORTH PRODUCTS INC, PHASE IV?
ELSASSER ARCHITECTURAL INC. is the design firm of record for CHATSWORTH PRODUCTS INC, PHASE IV, according to its TDLR filing.
How much does CHATSWORTH PRODUCTS INC, PHASE IV cost and how big is it?
CHATSWORTH PRODUCTS INC, PHASE IV has an estimated construction value of $850K, based on its TDLR filing.
📋Scope of Work
Addition of 18,500 sq. ft. manufacturing/storage building onto an existing 50,000 sq. f.t manufacturing/storage
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Apr 2, 2015
Review Complete
Inspection Complete
Closed
Apr 1, 2016
🔗Related Projects
📄Related City Permits
Building permits found at or near this location
ePlan: Residential Expedited Review - New construction of a 2-Story Single Family Res. [5bed 4bath] with Habitable Attic Attached Garage
Interior Remodel - renovating the interior of the home to be an open format floor plan with the removal of the central wall. New drywall to be installed and patched in areas exceeding 120 linear feet plumbing fixtures moved from south wall to north wall in primary bathroom window replacement like for like in the entire home and a french door to window change in the primary bedroom (egress area but with no change to width). Gas line to shift from the west to south wall of the kitchen. Attached carport and wood deck to be removed.
Irrigation for front and back yards at 3004 Oak Park
Construct new driveway approach of 18 FT. No sidewalk inspection per plan review.
EV Charger