Under construction📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

EBM 3D PRINTING LAB

1310 RANKIN ROAD, Houston, TX 77073, Houston, TX, 77073

EBM 3D PRINTING LAB is a renovation/alteration project at 1310 RANKIN ROAD, Houston, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $400K.

Pre-Construction15%

📊Project Metrics

TDLR #EABPRJB8811400

$400K

Project Value

—

Square Feet

—

Cost/SqFt

5 months

Duration

Registered:Feb 27, 2018

Start:Apr 1, 2018

Target:Sep 1, 2018

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

EBM 3D PRINTING LAB is a Renovation/Alteration project located at 1310 RANKIN ROAD, Houston, TX 77073 in Houston, Texas. The project has an estimated value of $400K. SCHLUMBERGER is the property owner and PDG ARCHITECTS is the design firm of record. The project was registered with TDLR on February 27, 2018.

❓Frequently Asked Questions

What is EBM 3D PRINTING LAB?

EBM 3D PRINTING LAB is a renovation/alteration project at 1310 RANKIN ROAD in Houston, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: 3D Printer Lab

Is EBM 3D PRINTING LAB open in Houston?

EBM 3D PRINTING LAB is currently under construction in Houston, TX. Its current TDLR status is "Project Registered".

Where is EBM 3D PRINTING LAB located?

EBM 3D PRINTING LAB is located at 1310 RANKIN ROAD, Houston, TX, 77073, in Harris County.

Who is the owner or developer of EBM 3D PRINTING LAB?

SCHLUMBERGER is the property owner/developer of record for EBM 3D PRINTING LAB, per its TDLR project registration.

Who is the architect or design firm for EBM 3D PRINTING LAB?

PDG ARCHITECTS is the design firm of record for EBM 3D PRINTING LAB, according to its TDLR filing.

How much does EBM 3D PRINTING LAB cost and how big is it?

EBM 3D PRINTING LAB has an estimated construction value of $400K, based on its TDLR filing.

📋Scope of Work

3D Printer Lab

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.