Under construction📋Project Registered🔧 Additions to Existing Building💵 This project is privately funded, on private land for private use.

WORKSTRINGS INTERNATIONAL

2424 E. SLATON HWY, Lubbock, TX 79404, Lubbock, TX, 79404

WORKSTRINGS INTERNATIONAL is a additions to existing building project at 2424 E. SLATON HWY, Lubbock, in Lubbock County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $300K.

Pre-Construction15%

📊Project Metrics

TDLR #EABPRJB8812439

$300K

Project Value

—

Square Feet

—

Cost/SqFt

6 months

Duration

Registered:Mar 13, 2018

Start:Mar 1, 2018

Target:Sep 1, 2018

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

WORKSTRINGS INTERNATIONAL is a Additions to Existing Building project located at 2424 E. SLATON HWY, Lubbock, TX 79404 in Lubbock, Texas. The project has an estimated value of $300K. GREG SCOTT is the property owner and DLC DESIGNS LLC is the design firm of record. The project was registered with TDLR on March 13, 2018.

❓Frequently Asked Questions

What is WORKSTRINGS INTERNATIONAL?

WORKSTRINGS INTERNATIONAL is a additions to existing building project at 2424 E. SLATON HWY in Lubbock, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Expansion of Make Ready facility for drill shaft qualityassurance. Office, restroom and break room provided.

Is WORKSTRINGS INTERNATIONAL open in Lubbock?

WORKSTRINGS INTERNATIONAL is currently under construction in Lubbock, TX. Its current TDLR status is "Project Registered".

Where is WORKSTRINGS INTERNATIONAL located?

WORKSTRINGS INTERNATIONAL is located at 2424 E. SLATON HWY, Lubbock, TX, 79404, in Lubbock County.

Who is the owner or developer of WORKSTRINGS INTERNATIONAL?

GREG SCOTT is the property owner/developer of record for WORKSTRINGS INTERNATIONAL, per its TDLR project registration.

Who is the architect or design firm for WORKSTRINGS INTERNATIONAL?

DLC DESIGNS LLC is the design firm of record for WORKSTRINGS INTERNATIONAL, according to its TDLR filing.

How much does WORKSTRINGS INTERNATIONAL cost and how big is it?

WORKSTRINGS INTERNATIONAL has an estimated construction value of $300K, based on its TDLR filing.

📋Scope of Work

Expansion of Make Ready facility for drill shaft qualityassurance. Office, restroom and break room provided.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.