Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

PROSTAR MANUFACTURING, INC. PHASE 3

5527 BAY OAKS DRIVE, Pasadena, TX 77505, Pasadena, TX, 77505

PROSTAR MANUFACTURING, INC. PHASE 3 is a new construction project at 5527 BAY OAKS DRIVE, Pasadena, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $3.3M.

Construction50%

📊Project Metrics

TDLR #EABPRJB8816476

$3.3M

Project Value

—

Square Feet

—

Cost/SqFt

5 months

Duration

Registered:May 4, 2018

Start:Jun 1, 2018

Target:Nov 1, 2018

📝

Review Complete

Design review complete, construction may proceed

PROSTAR MANUFACTURING, INC. PHASE 3 is a New Construction project located at 5527 BAY OAKS DRIVE, Pasadena, TX 77505 in Pasadena, Texas. The project has an estimated value of $3.3M. PROSTAR MANUFACTURING INC. is the property owner and CIVIL CONCEPTS INC. is the design firm of record. The project was registered with TDLR on May 4, 2018.

❓Frequently Asked Questions

What is PROSTAR MANUFACTURING, INC. PHASE 3?

PROSTAR MANUFACTURING, INC. PHASE 3 is a new construction project at 5527 BAY OAKS DRIVE in Pasadena, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: 53,860 sf pre-engineered metal building with tilt-up façade, new ADA restrooms, offices, lunch room and fabricat

Is PROSTAR MANUFACTURING, INC. PHASE 3 open in Pasadena?

PROSTAR MANUFACTURING, INC. PHASE 3 is currently under construction in Pasadena, TX. Its current TDLR status is "Review Complete".

Where is PROSTAR MANUFACTURING, INC. PHASE 3 located?

PROSTAR MANUFACTURING, INC. PHASE 3 is located at 5527 BAY OAKS DRIVE, Pasadena, TX, 77505, in Harris County.

Who is the owner or developer of PROSTAR MANUFACTURING, INC. PHASE 3?

PROSTAR MANUFACTURING INC. is the property owner/developer of record for PROSTAR MANUFACTURING, INC. PHASE 3, per its TDLR project registration.

Who is the architect or design firm for PROSTAR MANUFACTURING, INC. PHASE 3?

CIVIL CONCEPTS INC. is the design firm of record for PROSTAR MANUFACTURING, INC. PHASE 3, according to its TDLR filing.

How much does PROSTAR MANUFACTURING, INC. PHASE 3 cost and how big is it?

PROSTAR MANUFACTURING, INC. PHASE 3 has an estimated construction value of $3.3M, based on its TDLR filing.

📋Scope of Work

53,860 sf pre-engineered metal building with tilt-up façade, new ADA restrooms, offices, lunch room and fabricat

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.