Construction complete · Jun 2019🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Koonsen's Deer & Meat Processing

101 N. Franklin Street, Holland, TX 76534, Holland, TX, 76534

Koonsen's Deer & Meat Processing is a new construction project at 101 N. Franklin Street, Holland, in Bell County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jun 2019). The project has an estimated value of $190K across about 2,000 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2019001219

$190K

Project Value

2,000

Square Feet

$95/sqft

Cost/SqFt

5 months

Duration

Registered:Dec 19, 2018

Start:Jan 1, 2019

Target:Jun 1, 2019

🏁

Project Closed

Project has been completed and closed

Koonsen's Deer & Meat Processing is a New Construction project located at 101 N. Franklin Street, Holland, TX 76534 in Holland, Texas. The project has an estimated value of $190K covering 2,000 sq ft. Stan Koonsen is the property owner and Abacus Engineering, Inc. is the design firm of record. The project was registered with TDLR on December 19, 2018.

❓Frequently Asked Questions

What is Koonsen's Deer & Meat Processing?

Koonsen's Deer & Meat Processing is a new construction project at 101 N. Franklin Street in Holland, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Meat Processing & Sales with storage, freezer, cooler, office, restrooms and parking. 2,000 sq. ft.

Is Koonsen's Deer & Meat Processing open in Holland?

Construction on Koonsen's Deer & Meat Processing is complete — TDLR records show the project passed its required accessibility inspection in Jun 2019. The building is finished and very likely open.

Where is Koonsen's Deer & Meat Processing located?

Koonsen's Deer & Meat Processing is located at 101 N. Franklin Street, Holland, TX, 76534, in Bell County.

Who is the owner or developer of Koonsen's Deer & Meat Processing?

Stan Koonsen is the property owner/developer of record for Koonsen's Deer & Meat Processing, per its TDLR project registration.

Who is the architect or design firm for Koonsen's Deer & Meat Processing?

Abacus Engineering, Inc. is the design firm of record for Koonsen's Deer & Meat Processing, according to its TDLR filing.

How much does Koonsen's Deer & Meat Processing cost and how big is it?

Koonsen's Deer & Meat Processing has an estimated construction value of $190K and approximately 2,000 square feet (about $95/sqft), based on its TDLR filing.

📋Scope of Work

Meat Processing & Sales with storage, freezer, cooler, office, restrooms and parking. 2,000 sq. ft.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.