Medivators Extruder Room
Medivators Extruder Room is a renovation/alteration project at 3150 Pollok Drive, Conroe, in Montgomery County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2019). The project has an estimated value of $100K across about 1,300 sq ft.
📊Project Metrics
TDLR #TABS2019002924Project Closed
Project has been completed and closed
Medivators Extruder Room is a Renovation/Alteration project located at 3150 Pollok Drive, Conroe, TX 77303 in Conroe, Texas. The project has an estimated value of $100K covering 1,300 sq ft. Medivators INC is the property owner and REESE DS, INC. is the design firm of record. The project was registered with TDLR on January 18, 2019.
❓Frequently Asked Questions
What is Medivators Extruder Room?
Medivators Extruder Room is a renovation/alteration project at 3150 Pollok Drive in Conroe, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior remodel to create a new room for extruder equipment.
Is Medivators Extruder Room open in Conroe?
Construction on Medivators Extruder Room is complete — TDLR records show the project passed its required accessibility inspection in Feb 2019. The building is finished and very likely open.
Where is Medivators Extruder Room located?
Medivators Extruder Room is located at 3150 Pollok Drive, Conroe, TX, 77303, in Montgomery County.
Who is the owner or developer of Medivators Extruder Room?
Medivators INC is the property owner/developer of record for Medivators Extruder Room, per its TDLR project registration.
Who is the architect or design firm for Medivators Extruder Room?
REESE DS, INC. is the design firm of record for Medivators Extruder Room, according to its TDLR filing.
How much does Medivators Extruder Room cost and how big is it?
Medivators Extruder Room has an estimated construction value of $100K and approximately 1,300 square feet (about $77/sqft), based on its TDLR filing.
📋Scope of Work
Interior remodel to create a new room for extruder equipment.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Jan 18, 2019
Review Complete
Inspection Complete
Closed
Feb 28, 2019