Construction complete · Feb 2020🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Caliber Collision

IH 10 E N.Foster Rd. & IH 10 E., Converse, TX 78109, Converse, TX, 78109

Caliber Collision is a new construction project at IH 10 E N.Foster Rd. & IH 10 E., Converse, in Bexar County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2020). The project has an estimated value of $1.5M across about 18,559 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2019005611

$1.5M

Project Value

18,559

Square Feet

$81/sqft

Cost/SqFt

8 months

Duration

Registered:Feb 25, 2019

Start:Jun 1, 2019

Target:Feb 1, 2020

🏁

Project Closed

Project has been completed and closed

Caliber Collision is a New Construction project located at IH 10 E N.Foster Rd. & IH 10 E., Converse, TX 78109 in Converse, Texas. The project has an estimated value of $1.5M covering 18,559 sq ft. Cross Development is the property owner and NCA PARTNERS is the design firm of record. The project was registered with TDLR on February 25, 2019.

❓Frequently Asked Questions

What is Caliber Collision?

Caliber Collision is a new construction project at IH 10 E N.Foster Rd. & IH 10 E. in Converse, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: An Auto body repair shop under 2-B construction is proposed. It will be divided into two areas which is the workshop area and office/lobby. The workshop will consist of Mtl. Panel and the office will have masonry and tuff wall for exterior.

Is Caliber Collision open in Converse?

Construction on Caliber Collision is complete — TDLR records show the project passed its required accessibility inspection in Feb 2020. The building is finished and very likely open.

Where is Caliber Collision located?

Caliber Collision is located at IH 10 E N.Foster Rd. & IH 10 E., Converse, TX, 78109, in Bexar County.

Who is the owner or developer of Caliber Collision?

Cross Development is the property owner/developer of record for Caliber Collision, per its TDLR project registration.

Who is the architect or design firm for Caliber Collision?

NCA PARTNERS is the design firm of record for Caliber Collision, according to its TDLR filing.

How much does Caliber Collision cost and how big is it?

Caliber Collision has an estimated construction value of $1.5M and approximately 18,559 square feet (about $81/sqft), based on its TDLR filing.

📋Scope of Work

An Auto body repair shop under 2-B construction is proposed. It will be divided into two areas which is the workshop area and office/lobby. The workshop will consist of Mtl. Panel and the office will have masonry and tuff wall for exterior.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.