Project intelligenceTDLR TABS2019013847Renovation/Alteration
Funding type

This project involves public funds, public land, or is a Federally funded roadway project.

EPCC Maker Spaces in El Paso, TX

919 Hunter Dr., El Paso, TX, 79915

Target date passed (Nov 2019)Review Complete

EPCC Maker Spaces is a renovation/alteration project at 919 Hunter Dr., El Paso, in El Paso County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Scheduled to finish Nov 2019 per its TDLR filing; no final inspection recorded yet. The project has an estimated value of $180K across about 3,742 sq ft.

Estimated project value
$180K
About this figure

Estimated construction cost supplied in the TDLR filing. This is not a current property appraisal or a final construction invoice.

Reported floor area
3,742 ft²
About this figure

Square footage reported for this scope of work. It may cover only part of a larger property.

Estimated cost / ft²
$48/sqft
About this figure

Calculated from this filing’s estimated cost divided by its reported square footage. Available only when both figures are supplied; it is not a market benchmark.

Scheduled duration
4 months
About this figure

The interval between the filed start and completion dates. These dates describe the proposed schedule and do not measure actual construction progress.

The project record

Project timeline

Explore filed milestones and scheduled dates. Open a milestone for its source.

Jun 12, 2019156 days across supplied datesNov 15, 2019

4 timeline dates shown.

  1. Project registered · TDLR filing

    Registration of the project with the Texas Department of Licensing and Regulation.

    Source: TDLR filing

    View source record
  2. Review complete · TDLR filing

    The filing records completion of the accessibility review.

    Same day as the preceding date shown.

    Source: TDLR filing

    View source record
  3. Scheduled construction start · Scheduled date

    A date supplied in the filing; this does not confirm that work started or finished.

    33 days after the preceding date shown.

    Source: TDLR filing

    View source record
  4. Scheduled completion · Scheduled date

    A date supplied in the filing; this does not confirm that work started or finished.

    123 days after the preceding date shown.

    Source: TDLR filing

    View source record

📰About EPCC Maker Spaces

EPCC Maker Spaces is a $180,000 renovation project located at 919 Hunter Dr. in El Paso, Texas. The filing lists the facility name as Building A and covers 3,742 square feet of space. The work involves remodeling a classroom and a wood shop. Epcc is the owner of record, with CDA serving as the design firm. Eckhard K Fennig is the registered accessibility specialist for this TABS project.

Project Scope and Cost

The estimated cost for this renovation is $180,000. This results in a cost per square foot of $48. When compared to other renovation and alteration filings in El Paso County, this project’s cost is close to the county median. The median estimated cost for similar projects is $203,512, with the middle half ranging from $100,000 to $513,500. The size of 3,742 square feet is slightly above the median size of 3,500 square feet for these filings. However, the cost per square foot of $48 is below the county median of $66.

Timeline and Status

Construction was scheduled to begin in July 2019, with a completion date of November 2019. The registered accessibility specialist and design firm completed their plan review in June 2019. The project involves public funds, public land, or is a Federally funded roadway project. The TDLR status is listed as Review Complete. TDLR completed plan review in June 2019 and construction was scheduled to finish in November 2019; TDLR has not yet recorded a final inspection, so the current state of the site is not confirmed in the public record.

Epcc has one other TDLR-registered project, the Epcc Valle Verde Campus in El Paso, which totaled $195,000 and is closed. CDA has five other TDLR-registered projects totaling $3,209,050. These include the Weststar Bank at Fabens, Zaragoza Shopping Center, Crosby Elementary School, University Towers, and Miller Park North. University Towers has an inspection complete status, while the others are closed.

The ZIP code 79915 has a population of about 34,731. The median household income is $35,938. There are 14,139 housing units in this area. The median owner-occupied home value is $117,600. Housing in this zone is mostly owner-occupied. El Paso County unemployment rate (FRED, September 2026): 4.3 percent, lower than a year earlier. The project’s scheduled build window of 123 days is close to the county median of 120 days for similar renovations.

Review Complete

Design review complete, construction may proceed

Follow this project

Get an email when the status changes — permits pulled, construction started, work finished. Free, and nothing else.

Or watch all projects in 79915 (El Paso)

One email per change. Unsubscribe in one click. Privacy.

EPCC Maker Spaces is a Renovation/Alteration project located at 919 Hunter Dr., El Paso, TX 79915 in El Paso, Texas. The project has an estimated value of $180K covering 3,742 sq ft. EPCC is the property owner and CDA is the design firm of record. The project was registered with TDLR on June 12, 2019.

Frequently Asked Questions

Who is the owner of EPCC Maker Spaces?

Epcc is the owner of record for this project. They have another closed TDLR project, Epcc Valle Verde Campus, totaling $195,000.

What is the scope of work for this renovation?

The filing specifies the remodeling of a classroom and a wood shop within Building A. The total square footage is 3,742 sq ft.

Is EPCC Maker Spaces open to the public?

The TDLR record covers construction only and does not record whether the business has started serving customers. The project status is Review Complete.

Who is the design firm for this project?

CDA is the design firm of record. They have five other TDLR-registered projects, including University Towers and Crosby Elementary School.

When was the plan review completed?

The plan review was completed in June 2019. Construction was scheduled to start in July 2019 and finish in November 2019.

What is EPCC Maker Spaces?

EPCC Maker Spaces is a renovation/alteration project at 919 Hunter Dr. in El Paso, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Remodel of Classroom and wood shop

Is EPCC Maker Spaces open in El Paso?

EPCC Maker Spaces was scheduled to finish construction in Nov 2019 according to its TDLR registration, but TDLR has not recorded a final accessibility inspection, so its opening status is not confirmed in the public record.

Where is EPCC Maker Spaces located?

EPCC Maker Spaces is located at 919 Hunter Dr., El Paso, TX, 79915, in El Paso County.

Who is the owner or developer of EPCC Maker Spaces?

EPCC is the property owner/developer of record for EPCC Maker Spaces, per its TDLR project registration.

Who is the architect or design firm for EPCC Maker Spaces?

CDA is the design firm of record for EPCC Maker Spaces, according to its TDLR filing.

How much does EPCC Maker Spaces cost and how big is it?

EPCC Maker Spaces has an estimated construction value of $180K and approximately 3,742 square feet (about $48/sqft), based on its TDLR filing.

Scope of Work

Remodel of Classroom and wood shop

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.

Location & views

919 Hunter Dr., El Paso, TX, 79915

Explore the supplied address

A precise map point has not been loaded. Choose to look up the address, or open it in Google Maps using the link below.

Location by street address

Watch all construction in 79915 (El Paso)

A short email when anything new is filed in this ZIP. One ZIP free, weekly.

Unsubscribe in one click. Privacy.