Under construction📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Smart Code

3242 Preston Road, Plano, TX 75093, Plano, TX, 75093

Smart Code is a renovation/alteration project at 3242 Preston Road, Plano, in Collin County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $55K across about 2,700 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2019014262

$55K

Project Value

2,700

Square Feet

$20/sqft

Cost/SqFt

3 months

Duration

Registered:Jun 18, 2019

Start:Aug 1, 2019

Target:Nov 1, 2019

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Smart Code is a Renovation/Alteration project located at 3242 Preston Road, Plano, TX 75093 in Plano, Texas. The project has an estimated value of $55K covering 2,700 sq ft. Boerne International Academy, LLC is the property owner and 1718 Architecture is the design firm of record. The project was registered with TDLR on June 18, 2019.

❓Frequently Asked Questions

What is Smart Code?

Smart Code is a renovation/alteration project at 3242 Preston Road in Plano, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: To construct non-structural metal stud walls for a new office that helps instruct individuals in computer coding. New HVAC, electrical, and plumbing is a part of the scope of work.

Is Smart Code open in Plano?

Smart Code is currently under construction in Plano, TX. Its current TDLR status is "Project Registered".

Where is Smart Code located?

Smart Code is located at 3242 Preston Road, Plano, TX, 75093, in Collin County.

Who is the owner or developer of Smart Code?

Boerne International Academy, LLC is the property owner/developer of record for Smart Code, per its TDLR project registration.

Who is the architect or design firm for Smart Code?

1718 Architecture is the design firm of record for Smart Code, according to its TDLR filing.

How much does Smart Code cost and how big is it?

Smart Code has an estimated construction value of $55K and approximately 2,700 square feet (about $20/sqft), based on its TDLR filing.

📋Scope of Work

To construct non-structural metal stud walls for a new office that helps instruct individuals in computer coding. New HVAC, electrical, and plumbing is a part of the scope of work.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.